555058
10
Zoom out
Zoom in
Previous page
1/16
Next page
JA-80Y user manual MFJ55800
10
14. Triggering GSM re-registration sequence 923
After 923 has been entered, the communicator quits the GSM network and then re-
registers itself. This re-registration does not change any settings in the communicator. It
should be used after GSM network faults or data collisions and in some networks it also
has to be used after a blocked SIM card has been unblocked by the GSM provider. It is
also possible (if the SIM card can still receive) to trigger GSM network re-registration by
sending the following SMS instruction:
xxxx_GSM
where: xxxx is a valid access code (user or master)
_ is a space character
15. Forwarding of incoming SMS messages sequence 926x
This feature enables the automatic forwarding of incoming SMS messages which contain
no valid instructions to the system:
9260 messages are not forwarded, but the communicator sends them by CLIP protocol
to the simulated phone line (if an SMS phone is attached)
9261 messages are forwarded to the first programmed tel. number in memories M1 to
M8 (e.g. if numbers are only programmed in M5 and M6, then messages will be
forwarded to M5). The tel. number from which the SMS was received will be
shown at the beginning of the forwarded text.
Advanced settings/instructions in maintenance mode
The communicator allows for wide configurability in setting SMS reports and acoustic
signalling.
The communicator is capable of reporting all system events (Table 2).
Each event and each possible event source have their corresponding SMS texts
factory pre-programmed and programmable.
For each event, the phone number which the event should be reported to by SMS is
programmable.
For each event, whether the event should be indicated acoustically is programmable.
All SMS instructions can have their text re-defined.
16. Selection of the events reported by SMS sequence 82 M ec x
Table 2 shows a list of events which can be reported by SMSes and describes report
default settings. Use the following sequence to select which events should be reported by
SMS and to which phone numbers:
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80Y in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-80Y

Jablotron JA-80Y Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info