555058
12
Zoom out
Zoom in
Previous page
1/16
Next page
JA-80Y user manual MFJ55800
12
restored
17 Fault
18 Fault no longer present
19 Mains dropout longer than 30
minutes
20 Mains dropout
21 Mains restored
22 Discharged battery
23 Battery OK
24 Switching to Service Mode
25 Leaving Service Mode
26 PGX ON/OFF
27 PGY ON/OFF
28 Radio communication jamming
present
29 Internal communication fault
30 Internal communication
restored
31 Communication test
32 Unconfirmed alarm
Table 2 Reports which can be sent and factory-default settings
18. SMS text editing xxxxTXT
The communicator contains various text strings which are used to create SMS reports of
events (containing premises name, event name, event source name) and also SMS
instruction text. You can modify the factory default values according to your needs by
sending SMS instructions.
SMS instructions are of the form:
xxxx_TXT_n,text,n,text
where: xxxx is a valid access code (user or master).
_ is a space character
TXT is the instruction to edit texts
n is the text number - see Table 3
text is the new text which will replace the former text. It is invalid to enter a
comma or a full stop inside the text string, but a space is valid within the
text string
Note: Changing SMS instruction texts (601 to 611) means renaming the instructions for
system remote control. For instance, when you change the value of text No. 603 from
STATUS to SYSTEM STATE you will only be able to interrogate the system status with
the new instruction. You can change texts according to your needs and also include a
password to protect against unauthorized use of SMS instructions.
Example: If 4321 is a valid access code then sending the SMS instruction:
4321 TXT 3,PIR corridor,340,code Charlie will change both the name of the detector
assigned to the third position and the name of the code assigned to position 40.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80Y in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-80Y

Jablotron JA-80Y Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info