555058
15
Zoom out
Zoom in
Previous page
1/16
Next page
JA-80Y user manual MFJ55800
15
x What happens after picking-up the phone
0
An ordinary telephone line is simulated, it is possible to make phone calls from and
to the house (indicated by a dial tone in the receiver).
1
If you pick up the receiver, the telephone keypad works as an alarm system
keypad. It is impossible to make phone calls in this mode (you hear alarm keypad
sounds in the receiver)
2
The communicator does not react to phone operation – the telephone line is
disabled.
3
Emergency call – if you pick-up the phone, it dials the emergency number (see 21)
Notes:
While the communicator is occupied with reporting events, or it is not registered to
the GSM network, a busy signal is heard on the connected phone.
You can switch from line simulation mode (0) to keypad mode (1) by pressing # on
the phone (the receiver must be picked up). After hanging up, mode 0 will be restored.
When in emergency call mode (3), the communicator allows for a switch to mode 0 or
mode 1 by pressing the * key or the # key, respectively.
21. Emergency telephone number sequence 952 xx…x 0
If the simulated phone line is set to emergency call mode (see 20), then after picking up
the receiver the phone automatically calls a number programmed by:
952 xx...x 0
where: xxx…x is a phone number (max. 20 digits), keying in *9 will enter “+” for
international calls.
Remote access by Internet
The system can be accessed remotely via www.GSMLink.cz which allows complete
programming by installers and also operating the system by end users. The GPRS service
(or, alternatively, SMS) is used for data transfer. The www.GSMLink.cz
access is
provided by Jablotron free-of-charge (only the data transfer from the premises is charged
for).
Accessing the communicator remotely requires its SIM card to be enabled for GPRS
data transfer. Only then can the device be registered with the GSMLink website. To do
the registration itself, take the following steps:
Specify your login parameters – user name and password – as well as other data
required for registration (including texts used to obtain a forgotten code).
Enter the communicator registration code (printed on the warranty certificate
attached to the communicator module). The registration code has the format XXXXX-
XXXXX-XXXX.
Enter the communicator SIM card tel. number.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80Y in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-80Y

Jablotron JA-80Y Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info