555058
2
Zoom out
Zoom in
Previous page
1/16
Next page
JA-80Y user manual MFJ55800
2
User features
The JA-80Y GSM communicator offers many useful features. Its main purpose is
information transmission – reporting events directly to you and to an ARC (Alarm
Receiving Centre).
In addition, the communicator allows you remote system control and programming by
phone or Internet and the remote control of appliances in a house (e.g. heating).
If a suitable phone set is connected, you can also make phone calls or send/receive SMS
messages. It is also possible to listen-in to a house via a connected intercom.
Can remote control be secure?
There are several mechanisms for protection to ensure that remote system control is secure:
Using a phone:
The communicator’s SIM card number gives basic protection. This number is not
explicitly referenced anywhere in the system, and we recommend keeping it private.
As a second level of protection, every SMS instruction is required to contain a valid
access codethe same code as the one used for system operation from the
keypad. This code is also used when you request system access via a phone call – for
so-called connection authorization.
The third level can be realised by naming instructions with your own texts. We
recommend recording these texts and keeping them in a safe place.
Using the Internet:
The communicator can be accessed via the Internet from the www.gsmlink.cz web
site. A secure (encrypted) protocol is used for transmissions.
First you have to register your system at www.gsmlink.cz
. After that your system’s
communicator becomes accessible and protected by the registered password and
user name.
As the final requirement for establishing a connection with the communicator you
need to enter a valid access code (equals the code used for operation via the system
keypad).
How the system works
Alarm triggering is processed by the communicator as follows:
If enabled, reporting to ARCs (Alarm Receiving Centres) is started first.
SMS reports are sent to pre-programmed phone numbers in the order they be stored.
As a sort of acoustic signalling, pre-programmed phone numbers are called (again in the
order that they are stored). Each phone number is dialled only once, regardless of whether
the call is answered or not.
If an alarm is cancelled by a user (by presenting a valid
code/card) while it is being reported, any unsent SMSes and
unperformed call reports are cancelled. However, the ARC still
gets a complete set of reports about events in the system.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80Y in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-80Y

Jablotron JA-80Y Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info