555054

Jablotron JA-60 Manual

3
Zoom out
Zoom in
Previous page
1/6
Next page
User instructions of JA-60 "Comfort" - 3 - MDY51415
5. Voice dialer programming by user
If the control panel is equipped with a 60X telephone dialer module and if enabled in the programming mode during installation, setting of
the voice dialer telephone numbers, messages and SMS messages can be changed in the user mode (with master code). Setting can be
performed by entering programming sequences from the keypad while in the control panel user mode (but not from the JA-60D keypad):
• Enter the user mode (entering F 0 Master Code, factory default UC=1234), indicated by a „U“ on the display. This can only be done
while the panel is disarmed.
• The parameters of the dialer can be set by entering programming sequences from the keypad. Any unfinished programming
sequence can be terminated by pressing the N key.
• To exit the user mode, press the N key („U“ will turn off).
List of the voice & Pager user programmable parameters
Function sequence options note
Telephone numbers for voice message
7xx..x F y
xx...x = tel. number, y = memory 1
to 4, pause = F0
Pager dialing programming
7x.xF9z..zF5
x..x = provider tel. number z..z =
pager number + message
1:
2:
3:
4:
5:
Erase telephone number
7F0Fy
y = memory 1 to 5,
entering 7F0F0 erases all
Record voice message
8 0
Dialer testing
89
if 2 messages - 88 & 89
5.1. Telephone number entering (sequence: 7xxx....xxFy)
Store telephone numbers for voice message entering: 7 xx... xx F y
xx...xx -> telephone number
y -> memory number from 1 to 4
A telephone number can have a maximum of 16 digits. A pause can be entered with F0 (pause can not be entered as the first digit).
Example: to store tel. number 483 123456 to memory no. 2 enter: 7 483 F0 123456 F2
Note: enter a pause (F0) after the last digit of a number which is calling a mobile phone. This way the number will be called only once
and the dialer will not check the line signals (some mobile phone systems do not generate standard telephone line signals).
When activated, the dialer will disengage all other devices hooked up to the phone line (telephone, fax..). It will then, one by one,
call and play the user recorded message, for all programmed numbers. If the dialer makes a successful connection to a programmed
number, it will not call that number again. If the number is busy, the dialer will make 3 more attempts to call it.
Empty tel. number memories are skipped. If all memories are empty, the dialer is completely disabled.
To delete a telephone number enter: 7 F0 Fy
y -> memory number from 1 to 4
entering 7 F0 F0 will erase all tel. numbers, including the Pager number
Store number to call Pager (to memory number 5) entering: 7 xx..x F9 zzz....zz F5
xx...x -> provider prefix
F9 -> separator (it will wait for a provider’s signal and will switch to DTMF if not used)
zzz...zz -> pager number and numeric message and other specific codes (language selectors, end of
message etc.) if requested by the Paging provider
F5 -> to store the number to memory no. 5
As a maximum 32 digits can be stored to memory number 5. Special characters can be entered with the following Fx codes:
F0 -> pause
F7 -> *
F8 -> #
Example: enter 7 0611 F9 1 1234 555 F80 F5 if the provider prefix is 0611, the Pager number 1234 and the message 555. Number 1
after F9 is a language selector, code F80 represents # 0 = end of message.
Note: some Paging providers also offer an option to send the message as an SMS to the GSM network. Consult your Paging provider
for details if you have trouble sending a message to the Pager.
To delete the Pager number enter: 7 F0 F5
If the memory number 5 is empty, no message will be sent to a Pager.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60

Jablotron JA-60 Additional guide - English - 1 pages

Jablotron JA-60 Installation Guide - English - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info