554882
9
Zoom out
Zoom in
Previous page
1/15
Next page
GD-04 DAVID 9 MKS51202_OS1*
temperature is signalled (e.g. 6°C). Sending an SMS instruction for switching relay X or Y off
puts the heating back to normal mode (with A or B disconnected from GND).
If input A or B is used for thermostat enrollment, the status SMS report (obtained from David
on an SMS request) contains information about the temperature.
Example: STATUS:A0,B0,C0,D0,X1,Y0,GSM:70%,TA:25/24C,TB:22/22C
where: TA labels data from thermostat A, TB labels data from thermostat B. The data is of
the form maintained temperature / measured temperature.
Enrolling a thermostat to the A or B input disables relay X or Y enrollments.
DIP switch g setting has no effect on enrolled thermostat operation.
NOTE: To delete all enrolled items, press and hold buttons XY and ABCD.
11.4. The GD-04P link cable
The GD-04P cable allows you to link David with a PC through an USB port and perform any
desired configuration using GDLink software. The software is supplied on a CD in the package
together with all the necessary drivers. You can also download GDLink from www.jablotron.cz
.
11.4.5. Installing GDLink and the drivers
1. Connect the GD-04P cable to a free USB port on your PC and insert the CD into the CD drive.
2. Wait for “New Hardware Wizard“ to start up.
3. Search for the drivers on the removable medium (CD).
4. When installing for WIN XP, ignore the notification about wrong authenticity with WIN XP and
continue with the installation process. Leave the other parameters without any modifications.
5. Finish the new hardware installation wizard process.
6. There are two devices contained in one, so please wait for the “New hardware wizard” to start
again. Repeat the procedure according to steps 3 to 5.
7. Your PC now has two new devices after successful installation - "Jablotron serial interface" as
a serial port (COM) driver and the USB device with the same name as the driver for USB.
8. Install the GDLink software on your PC.
9. Connect the GD-04P cable into David’s digital bus connector. GDLink is now ready to be started.
11.4.6. Using GDLink
The program allows for:
o Retrieval and modification of
David settings.
o Displaying the last 127
memorized events.
o Relays X and Y direct control.
o Inputs A to D status display.
A comprehensible help option is
provided as a part of the program.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

jablotron-gd-04

Reset search

  • I can’t work out how to register new phone numbers to our David garage gate system - the only resident who knew how has moved away. It works fine with my phone which is registered but some people who have just moving in would like to add their numbers . Any help would be greatly appreciated! Submitted on 23-5-2020 at 15:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron GD-04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron GD-04 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info