521904
7
Zoom out
Zoom in
Previous page
1/8
Next page
12 13
4
Press
to complete
the deletion.

return the Smart Panel to
STANDBY by pressing
.
2.5 Querying the ID Number of a Remote Control
The ID number of a remote control device can be checked as follows:
Step Keys Description Note
1 (1234/
4-digit PIN)
+
You must be in
STANDBY mode
before querying the
remote control ID
number.
To make sure you are in
STANDBY mode:
- Enter the default PIN “1 2 3
4” OR your new 4-digit PIN
- Press
- The Smart Panel will display
the image below when you
are in STANDBY mode:
(One beep indicates that you
entered a valid PIN, three
beeps indicate that an invalid
operation was performed).
2 (1234/
4-digit PIN)
+
Enter the default PIN
“1 2 3 4” OR your new
4-digit PIN for setting
followed by
.
The Smart Panel will display
the below image:
- The Smart Panel will display
the image below when you
are in STANDBY mode:
(One beep indicates that you
entered a valid PIN, three
beeps indicate that an invalid
operation was performed.)
2 (1234/
4-digit PIN)
+
Enter the
default PIN
“1 2 3 4” OR your new
4-digit PIN for setting
followed by
.
The Smart Panel will display
the below image:
3
Press then
to enter the Remote
Control DELETING
mode.
Then input the num-
ber of the remote con-
trol you wish to delete
from the system.

number of remote currently
enrolled to the system
(e.g. if the Smart Panel has
3 remotes enrolled the LCD

- Input the remote ID no.
(e.g. “02”) for the remote
you wish to delete (inputting
“00” will delete all remote
controls)

the total number of remotes
enrolled after deletion. (One
beep indicates that the
remote was successfully de-
leted from the Smart Panel.)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for I-onik WS-210TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of I-onik WS-210TX in the language / languages: English, German as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info