Manual I-onik WS-210TX (page 5 of 8) (English, German)

521904

Zoom out

Zoom in

1/8

8 9

4. Batterien

Achten Sie darauf, dass bei Batterien weder Korrosion noch Lecks auftreten, da dies das

Produkt dauerhaft schädigen kann. Beachten Sie beim Einlegen der Batterien die richtige

Polarität, wie innerhalb der Batteriefächer angezeigt. Kombinieren Sie keine neuen und

-

baren Batterien.

Leere Batterien sind über ein geeignetes Recyclingsystem zu entsorgen. Entsorgen Sie sie

nicht über Ihren normalen Hausmüll. NICHT VERBRENNEN.

5. Grenzen des Alarmsystems

Selbst die fortschrittlichsten Alarmsysteme können keinen 100-prozentigen Schutz gegen

Einbrüche oder Naturkatastrophen bieten. Alle Alarmanlagen können aus einer Vielzahl

von Gründen beeinträchtigt werden oder nicht auslösen.

Beachten Sie bitte, dass es bei Ihrem System Probleme geben kann, wenn:



Teile des Gebäudes platziert ist.





Zutritt verschaffen.



davon zu umgehen, blockieren oder abzuschalten.





beispielsweise zu nahe an einer Hitzequelle positioniert sind.

Hinweis:

Unzureichende Wartung ist der häugste Grund für Ausfälle bei einer Alarm-

anlage. Testen Sie Ihr System deshalb mindestens einmal pro Woche, um

sicherzustellen, dass die Sensoren und Alarmfunktionen richtig funktionieren.

Obwohl ein Alarmsystem möglicherweise dazu beiträgt, dass Ihre Versiche-

rungsprämien günstiger ausfallen, ist das System kein vollwertiger Ersatz für

eine Versicherung.

English

Please keep these instructions in a safe place for future reference.

Kit Contents:

1x Key Fob Remote Control

1x 12 V alkaline battery (included)



1. Introduction

The i.onik

remote control allows you to operate the systems Smart Panel remotely, from



and the siren can be activated instantly if required (using the panic function).

2. Operation

2.1 Powering up the Key Fob Remote Control

The remote control includes a 12 V alkaline battery. To acti-vate, unscrew and remove

the back of the remote control, and carefully remove the clear plastic insulation tab from

the battery. If the battery is dislodged, replace it noting the correct polarity shown inside

the battery compartment. Replace the battery cover.

2.2 Enrolling the Remote Control onto the Smart Panel

Before they can operate the system, new remote control devices need to be enrolled

(added to the system) as follows:

Step Keys Description Note

1 (1234/

4-digit PIN)

You must be in

STANDBY mode

before enrolling a

new remote control

onto the Smart

Panel.

To make sure you are in

STANDBY mode:

- Enter the default PIN

“1 2 3 4” OR your new

4-digit PIN

- Press

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of I-onik WS-210TX in the language / languages: English, German as an attachment in your email.

The manual is 0,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

I-onik WS-210TX Manual

Product: