521904
6
Zoom out
Zoom in
Previous page
1/8
Next page
10 11
4
Press to
complete
the enrolment.

return the Smart Panel to
STANDBY by pressing
.
2.3. Operating the Key Fob Remote Control
ARM – Pressing the ARM button on the remote will arm the system, triggering the preset

triggered zone.
DISARM – Pressing the DISARM button on the remote will disarm the system instantly
and the system will return to STANDBY Mode.
ALERT – Pressing the ALERT button on the remote will put the system into ALERT Mode
and a chime will sound if any of the sensors are triggered. The green light on the Smart

HOME – Pressing the HOME button on the remote will set the system in HOME Mode
which will operate the system in both ARM and ALERT Modes in different preset zones.
PANIC – If the HOME and ALERT buttons are pressed together the system‘s alarm is
immediately activated.
2.4 Deleting a Remote Control from the Smart Panel
If a remote control device is damaged or lost, it can be deleted from the system as
follows:
- The Smart Panel will display
the image below when you
are in STANDBY mode:
(One beep indicates that you
entered a valid PIN, three
beeps indicate that an invalid
operation was performed).
2 (1234/
4-digit PIN)
+
Enter the default
PIN “1 2 3 4” OR
your new 4-digit PIN
for setting followed
by
The Smart Panel will display
the below image:
3
Press then
to enter the Remote
Control Enrol mode.
Then press any key
on the new remote
control to enrol it
onto the system.

no. of the remote to be en-
rolled e.g. when enrolling the



ready for a second remote
to be enrolled. (One beep
indicates that the remote
was enrolled to the Smart
Panel successfully.)
Note: It is recommended
that the ID no. is marked
on the remote in case it
needs to be deleted at a
later stage.
Step Keys Description Note
1 (1234/
4-digit PIN)
+
You must be in
STANDBY mode
before enrolling a
new remote control
onto the Smart
Panel.
To make sure you are in
STANDBY mode:
- Enter the default PIN
“1 2 3 4”OR your new
4-digit PIN
- Press
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for I-onik WS-210TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of I-onik WS-210TX in the language / languages: English, German as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info