627060

Huvema HU 1010 B-4 SINO Manual

20
Zoom out
Zoom in
Previous page
1/48
Next page
20
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
2. addiTional safeTy rUles
Always keep in mind that:
• the machine must be switched off and disconnected from the power supply during maintenance and repairs,
• clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
3. characTerisTics
Distance between centers 1000 mm
Swing over bed 330 mm
Swing in gap 476 mm
Swing over cross slide 198 mm
Width of bed 187 mm
Hole through spindle 35 mm
Taper of spindle internal/external Camlock ASA DI-4
Spindle speeds 8
Spindle speed range 70-2000 RPM
Longitudinal feed range 0.02-2.7 mm p.r.
Cross feed range 0.01-1.35 mm p.r.
Thread cutting (Metr) (32) 0.4-32 mm
Thread cutting (Whit), G1” (32) 0.56-4
Thread cutting (Mod) (27) 0.2-3.5 M
Thread cutting (Pitch) (32) 8-120 DP
Tailstock spindle travel 95 mm
Tailstock spindle taper MT 2
Motor power 1.5 kW, 380 V
Weight 600 kg
Noise level 80 dB
Subject to change.
4. UsaGe
Bench lathes are especially suitable for machine workshops, repair shops, for working on machine shafts, spindles,
sleeves and round work pieces of a middle or small size. They can also be used to cut metric or Whitworth thread.
The machine has a compact construction, is easy to use, very efficient, and easy to repair and operate almost without
noise. The bed and the gears are hardened and grounded.
Always wear safety glasses!
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 1010 B-4 SINO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 1010 B-4 SINO in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 1010 B-4 SINO

Huvema HU 1010 B-4 SINO User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info