527106
3
Zoom out
Zoom in
Previous page
1/15
Next page
TO OPERATE THE FAN MODE:
Press the blue fan On/Off button ( ) on the top to turn the fan mode on. (The power light will not
illuminate on the front of the product in the fan mode).
To operate your Turbo Air Circulator Fan, turn the fan control knob to the desired fan speed: HIGH (
III),
MEDIUM (
II) or LOW (I).
Press the blue fan On/Off button ( ) to turn off and unplug the fan when you are finished using it.
USING THE OSCILLATION FEATURE:
Your HZ-0300 All Season Comfort
Fan & Heater is equipped with an oscillation option. If you wish to use
this feature, press the oscillation button ( ) and your unit will oscillate side to side. Push the oscillation
button ( ) again to turn the oscillating feature off.
OPERATING INSTRUCTIONS (CONT’D)
SAFETY FEATURES
The heater function is equipped with several devices and features for added protection.
A high temperature safety device (Hi Limit) prevents overheating of the heater.
A back-up safety thermal fuse.
A tip over switch so if the product were to tip over, and the air flow was blocked, the heater function
would automatically turn off.
TROUBLESHOOTING
If your heater shuts off unexpectedly, safety features may have been activated to prevent overheating.
If this happens:
Be sure the power cord is plugged into a working electrical outlet.
Check that the thermostat is not set too low. Turn the thermostat up until the heater starts.
Check for any obstructions. If you find one, turn the heater OFF and unplug it. Wait at least 10 minutes
to allow the heater to cool completely before removing any obstruction. When done, plug in the heater
and follow the OPERATING INSTRUCTIONS.
ELECTRICAL RATING
This product is rated at 1500 watts 120V, 60Hz.
We recommend that the All Season Comfort
Fan & Heater be cleaned at least once a month.
Turn the heater and/or fan mode off and unplug the unit before cleaning.
Use only a dry cloth to clean the external surfaces of the product.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION.
The fan grille is removable for cleaning. Remove the 3 screws with a phillips head screwdriver and use
only a dry cloth to clean the grill. Be sure the fan grille is in place with the screws tightly fastened before
operating the fan.
DO NOT immerse the unit in wa
ter and never allow water to drip into the motor housing.
When not in use, pack the unit with the cord bundled in its original container and store in a cool, dry place.
CLEANING AND STORAGE
HZ-0300_OM.qxd 10/25/06 3:11 PM Page 3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HZ-0300C SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ-0300C SERIES in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info