527106
2
Zoom out
Zoom in
Previous page
1/15
Next page
Place the All Season Comfort
Fan & Heater on a firm, level, open surface free from obstructions and at
least 3 ft. (0.9m) away from any combustible materials. DO NOT use on an unstable surface such as
bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small
children or pets.
With the product OFF (both the heater and fan on/off buttons will be elevated), plug into a polarized
120V wall outlet.
DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
Do not use with any converters or timers.
TO OPERATE THE HEATER MODE:
Press the red heater On/Off button ( ) on the
top, next to the thermostat control, to turn the
heater mode on.
The power light will illuminate on the front of
the product.
Turn the thermostat knob clockwise to turn
up the heat.
When the room reaches a comfortable temperature, slowly turn the thermostat control counter-
clockwise until the heater goes off. This is the point at which the thermostat setting equals the
room temperature. At this setting, the thermostat will automatically turn the heater on and off to
maintain this selected temperature.
Press the red On/Off heater button to turn off and unplug the heater
when you are finished using it.
NOTE: THIS PRODUCT IS EQUIPPED WITH A SAFEGUARD
ALERT HEAT
INDICATOR BADGE (FIG. 2). WHEN THE SAFEGUARD
ALERT BADGE
LOCATED ON THE GRILL CHANGES FROM BLACK TO RED THE GRILL IS
HOT TO THE TOUCH. DO NOT TOUCH THE GRILL UNTIL THE UNIT HAS
BEEN TURNED OFF AND THE SAFEGUARD
ALERT BADGE HAS TURNED
BACK TO BLACK.
USING THE OSCILLATION FEATURE:
Your HZ-0300 All Season Comfort
Fan & Heater is equipped with an
oscillation option. If you wish to use this feature, press the oscillation button
( ) and your unit will oscillate side to side. Push the oscillation button ( ) again to turn the oscillating
feature off.
SET-UP
OPERATING INSTRUCTIONS
Fig. 1
Fig. 2
Thermostat Control
Fan Control Knob
Oscillation
Button
Heater On/Off Button Fan On/Off Button
19. Do not operate the product with a damaged cord or plug or if the product malfunctions, is dropped or
damaged in any manner (see warranty).
20. Avoid contact with moving fan parts.
21. Place the product on a dry level surface.
22. Do not operate if the housing is removed or damaged.
23.
SAVE THESE INSTRUCTIONS
HZ-0300_OM.qxd 10/25/06 3:11 PM Page 2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HZ-0300C SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ-0300C SERIES in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info