Manual Honeywell HZ-0300C SERIES (page 1 of 15) (English, French, Spanish)

527106

Zoom out

Zoom in

1/15

ALL SEASON COMFORT

™

FAN & HEATER

Model HZ-0300 SERIES

Model HZ-0300C SERIES

It is intended for use on floor only.

The Honeywell trademark is used by Kaz,

Inc. under license from Honeywell Intellectual Properties, Inc.

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

1. Read all instructions before using this All Season

Comfort

™

Fan & Heater.

2. The heater is hot when in use. To avoid burns, do

not let bare skin touch hot surfaces. If provided,

use handle when moving this product. Keep

combustible materials, such as furniture, pillows,

bedding, papers, clothes, and curtains at least 3

feet (0.9 m) from the front of the heater and keep

them away from the sides and rear.

3. Extreme caution is necessary when an

y heater is

used by or near children or invalids and whenever

the heater is left operating and unattended.

4. Always unplug product when not in use.

5. Do not operate this product with a damaged cord

or plug or after it malfunctions, has been dropped

or damaged in any manner. Return product to

authorized service facility for examination,

electrical or mechanical adjustment, or repair.

6. Do not use outdoors.

7. This product is not intended for use in bathrooms,

laundry areas and similar indoor locations. Never

locate product where it may fall into a bathtub or

other water container.

8. Do not run cord under carpeting. Do not cover

cord with throw rugs, runners or the like. Arrange

cord away from traffic area where it will not be

tripped over.

9. This product is for use on 120 volts. This

appliance has a polarized plug (one blade is wider

than the other). To reduce the risk of shock, this

plug is intended to fit only one way in a polarized

outlet. If the plug does not fit securely in the

outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. DO NOT attempt to

defeat this safety feature.

10. This product draws 12.5 amps during operation.

To prevent overloading a circuit, do not plug the

product into a circuit that already has other

appliances working.

11. It is normal for the plug to feel warm to the touch;

however, a loose fit between the AC outlet

(receptacle) and plug may cause overheating and

distortion of the plug. Contact a qualified electrician

to replace loose or worn outlet.

12. To disconnect the product, first turn off the heater

and fan, then grip the plug and pull it from the

wall outlet. Never pull by the cord.

13. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause an

electric shock or fire, or damage the heater.

14. To prevent a possible fire, do not block air intakes

or exhaust in any manner. Do not use on soft

surfaces, like a bed, where openings may

become blocked.

15. A heater has hot and arcing or sparking parts

inside. Do not use it in the areas where gasoline,

paint, or flammable liquids are used or stored.

16. Use this product only as described in this manual.

Any other use not recommended by the

manufacturer may cause fire, electric shock,

or injury to persons.

17. Avoid the use of an extension cord because the

extension cord may overheat and cause a risk of

fire. However, if you have to use an extension

cord, the cord shall be No. 14 AWG minimum size

and rated not less than 1875 watts.

18.

The output of the hea

ter may var

y and its

tempera

ture may become intense enough to burn

exposed skin. Use of this heater is not

recommended for persons with reduced sensitivity

to heat or an inability to react to avoid burns.

HZ-0300_OM.qxd 10/25/06 3:11 PM Page 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ-0300C SERIES in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HZ-0300C SERIES Manual

Product: