30178
6
Zoom out
Zoom in
Previous page
1/6
Next page
www.hitecrcd.com
AM
PROP ORTI ONAL
- Using Electronic Speed Control
- Set the throttle trim in the center then adjust the ESC neutral point, the throttle trim can be
used for fine tuning adjustments.
- Adjust the full power position of the ESC (forward only) when the trigger is pulled
approximately 90% of the way. If the vehicle does not move forward when the trigger is
pulled and does when the trigger is pushed, check the motor connection first, if that is
correct then switch the %throttle% reversing switch to correct the issue.
- Adjusting the full power position of the ESC (Reversible version) is the same as the forward
only version, except you must make sure you are adjusting the forward not the reverse.
If the trigger is pulled and the full power adjustment does not effect the speed but does when
the trigger is pushed, the servo-reversing switch for the %throttle% needs to be switched.
After this is determined, use the same 90% as discussed previously for forward.
Reverse on most speed controls is not adjustable.
- Using Throttle Servo for Gas Powered Vehicles
Gas powered vehicles require the throttle servo to be set up to operate the carburetor and the
brakes together. The position of the control rod in the control horn will determine the amount
of travel; this must be set up properly to get the proper throw for the throttle and brakes.
Setups are different for individual applications so consult the manufacturer's manual for
the proper set up procedure.
9 10
Set the throttle trim in the center
Adjust Neutral Point
(Not included)
Adjust Full Power Position
(Not included)
www.hitecrcd.com
AM
PROP ORTI ONAL
Full Forward
90%
Throttle Trigger Neutral Position
Brake or Reverse
STEE.
THRO.
HIGH
LOW
STEE.
THRO.
HIGH
LOW
ON
ON
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitec LINX_SPORT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitec LINX_SPORT in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info