558282
2
Zoom out
Zoom in
Previous page
1/2
Next page
11. SelectCHANNEL ON:YESorNO
SelectYEStosetthetimeperiod(hoursandminutes)during
whichthetimeswitchshouldswitchonagain.
23h
Sunrise
ON OFF ON OFF
Sunset 5h
SelectNOifthenight-timeswitch-offshouldlasttothenext
sunset.
23h 23h
ON OFF ON OFF
Sunset
Sunset
Channel ON: YES
12. EnterhourandminutefortheONcommand(+/-)
OK
Theprogramissaved.
Creating a holiday program
A
ON/OFF programming
ForCYCLEandPULSE,youalsohavetosetthedurationand/or
period.
IfONisset,youcanselectthedaysoftheweekonwhichthe
timeswitchisswitchedoffduringholidays.
Theprocedureisthesameasforcreatingaweeklyprogram.
Random switching program
1)
Theprogrammedswitchingcommandisdelayedbyavariable(random)
periodof0-30minutes..
PressOKtostarttherandomswitchingprogram.
RANDOMashes.
Finish random switching program
PressDELtonishtherandomswitchingprogram.
ThetimerreturnstoAutomaticmode.
TAXIMODE – Transmission of programs
• Ahandheldprogrammingdevicecanbeusedtoexchangeprograms
viatheIRinterface.Todoso,thedevicemustbeintheTAXIMODE
andconnectedtopower.
• PressESCtonishtheTAXIMODE..
Operationofhandheldprogrammingdevice:
1. PressPROGtoselecttheprogramnumber.
2. PressINtoreadinaprogram.
PressOUTtoreadoutaprogram.
3. Holdthehandheldprogrammingdevice
verticallyovertheIRinterface.
4. PressingINorOUTagainwillstartthetransmission.
AwrongtransmissionisshownbyEr2.
Forfurtherinformation,seetheseparateoperatingmanual
“handheldprogrammingdevice”.
EXT I/P – External input
I/P COUNT – Pulse counter
SelectI/P COUNTtocheckthepulse
counter.Itwillcounthowmanytimes
theexternalbuttonwaspressed.
PressREStoresetthepulsecounter
tozeroandconrmbypressingYES.
EXT O/R – Manual switch
SelectEXT O/Rtoassignachannel
toanexternalbutton.
Uponpressingthebutton,an
overrideswitchingcommandwill
beexecuted.Itwillbeineffect
untilthenexttimethebuttonis
pressedoruntilthenextautomatic
switchingcommand.
COUNTDOWN – Countdown timer
SelectCOUNTDOWNtosetthe
timeforacountdowntimer.
Uponpressingthebutton,an
ONswitchingcommandwillbe
carriedout.Itswitchestheselected
channelONforthesettime.
Pressingthebuttonagainwillstart
thecountdowntimeragainatthe
settime.
Ifaprogramisalreadyrunningontheselectedchannel,noswitching
commandwillbeexecuted!Afterthetimehasexpired,thetimerreturns
toAutomaticmode.
ShortestONswitchingduration:30seconds
LongestONswitchingduration:90minutes
Countdowntimerandmanualswitchcannotbeselectedatthe
sametime!Thefunctionselectedlastalwaysapplies.
View and edit program
Weekly,yearly,holiday
andastroprogramscan
beviewedandedited
separately.
• Press
toscroll
throughthedifferent
programsteps.
• PressEDTtoedita
program.
Thisprocedureis
similartocreatinga
newprogram.
Delete program
Delete all programs
• PressYEStodeleteall
programs.
• PressNOtodeleteindividual
programs.
Delete individual programs
• Press
toscrollthroughthe
differentprogramsteps.
Conguration
ASTRO – Astro settings
1)
ClicktheCOUNTRYmenuitemto
selectthedesiredcountryandcity.
Thelongitudesandlatitudesare
generatedautomatically.
Ifthedesiredcityisnotincludedin
thelist,youcanmanuallysetthe
longitudesandlatitudesviathe
LAT/LONmenuitem.
Creating an ASTRO program
1)
Thefollowingsettingsarepossible:
SUNSETON
SUNRISEOFF
ThetimeswitchswitchesONatsunsetand
switchesOFFatsunrise
SUNSETOFF
SUNRISEON
ThetimeswitchswitchesOFFatsunsetand
switchesONatsunrise
SUNRISEPULSE ThetimeswitchswitchesONatsunrisefora
certaintime(pulse)
SUNSETPULSE ThetimeswitchswitchesONatsunsetfora
certaintime(pulse))
SUNRISE
SUNSET
PULSE
ThetimeswitchswitchesONatsunriseand
sunsetforacertaintime(pulse)
Sunset ON / Sunrise OFF
1. Conrm SUNSET ON / SUNRISE OFFbypressingOK.
Freememorylocationsarebrieydisplayed.
2. Whenprompted,selectAstro-settings.
3. Whenprompted,selectchannels
andconrmbypressing .
OK
Theweekdaydisplayisashing.
ON command:
4. Selectthedesireddays
andconrmbypressing
OK
5. Enterstartdate(monthandday)intherelevantbox(+/-)
OK
6. Enterstopdate(monthandday)intherelevantbox(+/-)
OK
7. EnterminutesfortheOFFSET(+/-)
OK
OffsetcanbeusedtooffsettheONandOFFswitchingtimesof
theAstroprogram.Thisisdoneinordertoadaptthemtothe
localconditions.
ExampleSUNSET ON / SUNRISE OFF:
Offset=+00:15ThetimeswitchswitchesON15minutesafter
thecalculatedsunsetandswitchesOFF15minutesafterthe
calculatedsunrise.
8. Selectthe OFF PERIOD: YESorNO
SelectYEStosetthetimeperiod(hoursandminutes)
duringwhichthetimeswitchshouldswitchoff,e.g.
night-timeswitch-offfrom23-5h.
SelectNOtosetnoOFFperiod.
OFF period: YES
9. EnterhourandminutefortheOFFcommand(+/-)
OK
10. Whenprompted,selectdesireddays
andconrmbypressing
OK
LIGHT – Background illumination
• SelectFIX ONtoset
thebackgroundlighting
permanently.
• Select2 MINifyouwantthe
backgroundlightingtobe
automaticallyswitchedoff2
minutesafteryourlastinput.
PIN – Set PIN
• Press
+ -
tosetanumeric
value.
• PressOKtosetthenextnumber.
• SelectNO PIN,toremovethe
PIN.
HCOUNTER – Set hour counter
• Press
toselectthe
channels.
• SelectREVIEWtocheckthehour
counter.
• Press
toscrollthroughthe
differentprogramsteps
• PressREStoresetthehour
counterforthischannel.
HCOUNTER – Set service counter
Youcansetthenumberof
operatinghoursafterwhicha
servicemessageistoappear.It
willbeshownonthedisplayas
soonasthecounterhasreached
thenumberofhourssetbyyou.
• Press
toselectthe
channels.
• Press
+ -
tosetanumeric
value.
Maintenance and repair
Battery change
Beforechangingthebattery,thedevicemustbedisconnectedfromthe
powersupply!Dateandtimewillbelost!
1. Liftthebatterycompartmentusinga
screwdriver.
2. Takethebatteryoutofthesupport.
3. Insertnew(LithiumbatterytypeCR2450)
batteryintosupport.
Observepolarityofthebattery!
4. Pushbatterysupportdownwarduntilit
engages.
5. Disposeofthebatteryinan
environmentallyfriendlymanner.
Disposal / Recycling
Disposeofthepackingmaterialcorrectlyaccordingtolegal
requirementsandregulations.
Observethefollowingnotesfordisposingofdefectivesystem
componentsorthesystemafteritsservicelife:
• Disposeofappropriately,i.e.separatingthepartstobedisposedof
accordingtomaterialgroups.
• Donotthrowelectricalandelectroniccomponentsinthebin.Bring
thesepartstotherecyclingcenters.
• Alwaysensuretheenvironmentallysounddisposalconformtothe
state-of-the-artenvironmentprotection,recyclinganddisposal
engineering.
Automatic/Manual mode
• Manualswitch:DurationON/DurationOFF/OVR/Automaticmode
• Leftbutton=channel1/Rightbutton=channel2
Press1x=FIXON=
DurationON
Press2x=FIXOFF=DurationOFF
Press3x=OVR=Overridemode
Press4x=Automaticmode
Override mode
TheOverridefunction(temporaryprogram
overwrite)allowstheusertoswitchONorOFFearly.Thisdependson
thecurrentchannelstatus.TheOverridefunctionappliesonlytothe
currentprogramandremainsactiveuntilthenextprogramchange.
Afterthat,thetimerreturnstoAutomaticmode.
1)
Functionnotavailableforallproducts.
2)
 AvailableonlyifindividualdayshavebeenselectedfortheON
command.
4)
 OnlyappearswhentheAstro-settingsarenotset.
ESC OK
1612 18 24
15:26
1
1 OFF ON 2
2
OVRFIX
ESC OK
1612 18 24
15:26
1
1 OFF ON 2
2
MINUTES OFFSET
OK
OFF PERIOD
HOUR CHL OFF
MIN CHL OFF
YES
OK
OK
CHL ON
HOUR CHL ON
YES
OK
MIN CHL ON
SAVED
OK
MENU
PROGRAM
NEW
HOLIDAY
ON/OFF
PULSE
CYCLE
OFF
OK
OK
OK
A
RANDOM
OK
RANDOM
DEL
MENU
RANDOM
OK
RANDOM
OK
7:00 20:00
OFF
ON
7:30 20:30
MENU
CONFIG
OK
TAXIMODE
LIGHT
PIN
HCOUNTER
EXT I/P
ASTRO
1)
TAXXI
out
prog
in
RS232
EXT I/P
I/P COUNT
OK
OK
I/P
00000
OK
EXT I/P
EXT O/R
OK
OK
SELECT
CHANNEL
1)
OK
EXT I/P
COUNTDOWN
OK
OK
SELECT CHL
1)
OK
DURATION
MIN:SEC
OK
DELETE
DELETE ALL
ONO PO01
OK
NO
DEL
CONFIRM
YES
MENU
PROGRAM
DELETE
DELETE ALL
CONFIRM
OK
OK
YES
YES
MENU
PROGRAM
REVIEW
ALL
ONO P001
CHANNELS
1
OK
OK
OK
EDT/OK
ASTRO
COUNTRY
OK
OK
OK
UNITED KINGDOM
LONDON
OK
PIN
PIN
OK
OK
PIN
0000
OK
LIGHT
FIX ON
2 MIN
OK
OK
HCOUNTER
SELECT
OK
OK
SELECT
CHANNEL
1)
OK
HCOUNTER
SERVICE
OK
OK
CHANNEL
1)
OK
HOURS
00000 H
SERVICE
OK
MENU
PROGRAM
NEW
ASTRO
SUNSET ON
SUNRISE OFF
OK
OK
OK
OK
SUNSET ON
SUNRISE OFF
OK
ASTRO
4)
OK
SELECT CHL
1)
OK
DAY CHL ON
MONTH START
DAY START
MONTH END
DAY END
OK
OK
OK
OK
OK
ON/OFF
OK
SELECT CHL
1)
DAY CHL ON
MONTH START
DAY START
MONTH END
OK
OK
OK
OK
OK
DAY END
OK
HOUR CHL ON
MIN CHL ON
OK
OK
DAY CHL OFF
2)
OK
HOUR CHL OFF
MIN CHL OFF
SAVED
OK
OK
talento_471-472-791-792-881-882_pro_EN_A3.indd 2 16.02.2012 10:40:04
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grasslin Talento 791 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grasslin Talento 791 pro in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grasslin Talento 791 pro

Grasslin Talento 791 pro User Manual - English, German - 28 pages

Grasslin Talento 791 pro User Manual - German - 2 pages

Grasslin Talento 791 pro User Manual - Dutch - 28 pages

Grasslin Talento 791 pro User Manual - Dutch - 2 pages

Grasslin Talento 791 pro User Manual - Danish, French - 28 pages

Grasslin Talento 791 pro User Manual - French - 2 pages

Grasslin Talento 791 pro User Manual - Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info