606987
5
Zoom out
Zoom in
Previous page
1/11
Next page
6
Teaching in radio motor valve drive
1. Start the programming mode on the radio motor valve drive by
pressing the red button for longer than 4 seconds.
The top red LED flashes: The radio motor valve drive is now in the
programming mode for approx. 1 minute.
2. Trigger the teach-in telegram on the corresponding radio transmitter
(radio room temperature sensor or radio controller).
See operating instructions of radio transmitter.
The radio motor valve drive acknowledges the teach signal and the
storage of the radio connection by the top LED lighting up
continuously.
3. The programming mode ends automatically after approx. 1 minute or
by briefly pressing the red button.
Radio motor valve drive is outside teach-in range
If the radio motor valve drive is mounted outside the teach-in range
(approx. 5 m), proceed as follows with for teaching in:
1. Insert the batteries before the radio motor valve drive is mounted on
the heating valve.
All LEDs light up briefly. Then the radio motor valve drive carries out
the traverse motions (calibration traverse).
2. Position the radio motor valve drive near the corresponding radio
transmitter and teach it in.
3. Remove the batteries from the radio motor valve drive (the taught-in
radio connection is retained).
4. Mount the radio motor valve drive on the heating valve.
5. After approx. 1 minute, insert the batteries in the radio motor valve
drive again.
All LEDs light up briefly. Then the calibration traverse begins
automatically.
With this procedure, the temperature control may be carried out
delayed, as the radio motor valve drive requires some time following a
battery change to synchronise with the radio transmitter.
i
Limited radio range
In the programming mode, the radio range of the radio motor valve drive
is limited to approx. 5 m.
i
Teaching in several radio motor valve drives
If several radio motor valve drives are to be assigned, first all valve drives
must be switched into the teach-in mode before that teach-in process is
started on the radio transmitter.
If a radio motor valve drive is to be assigned to a group at a later time,
first all radio connections must be deleted in order to then assign all radio
motor valve drives simultaneously.
i
Assigning new radio transmitter
When teaching in a new radio transmitter, the existing assignment is
overwritten. In this case, the radio motor valve drive reacts to the radio
transmitter assigned last.
i
Calibration traverse must be carried out
If the calibration traverse is not carried out again, please remove the
batteries again and reinsert them after approx. 1 minute.
If the radio motor valve drive is not calibrated to the heating valve, no
correct temperature control can take place.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 118700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 118700 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 118700

Gira 118700 User Manual - German - 11 pages

Gira 118700 User Manual - Dutch - 12 pages

Gira 118700 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info