606987
7
Zoom out
Zoom in
Previous page
1/11
Next page
8
Changing closing force control
Under certain circumstances the factory set closing force control may not
be sufficient to completely close the valve. In this case you can change
the method of determining the closing force.
There are two types of closing force control:
Path-controlled: The closing points are determined with a calibration
traverse and pressed 0.4 mm (factory setting).
Force-controlled: The radio motor valve drive closes the heating valve
until the current limitation switches off.
The closing force is changed over as follows:
1. Press the two buttons to start the stroke display.
2. Press the blue button for longer than 3 seconds during the stroke
display.
3. Release the button and press
the red button for path-controlled or
the blue button for force-controlled.
The respectively set closing force
method will be displayed by the
top or bottom LED.
After you have changed the
closing force control, the radio
motor valve drive carries out a
calibration traverse.
Temperature adjustment
To adjust the local temperature in the room, the heater setpoint can be
changed on the radio motor valve drive by ±2 K.
Displaying temperature adjustment
To display the current temperature
adjustment on the valve drive,
proceed as follows:
1. Briefly press the red button to
start the status display.
The current temperature
adjustment is displayed for
3 seconds via the LED.
Setting temperature adjustment
To set the temperature adjustment,
proceed as follows.
1. First display the current
temperature adjustment by
briefly pressing the red button.
The current temperature
adjustment is displayed for 3
seconds via the LED.
2. Within these 3 seconds, press
the
red button to increase the
setpoint temperature
blue button to decrease the
setpoint temperature.
Path-
controlled
Force-
controlled
i
Temperature adjustment remains unchanged
The temperature adjustment (±2 K) remains unchanged even after a
change in the setpoint temperature (e.g. from comfort to lowering
temperature).
Setpoint
offset
+ 2 K
+ 1 K
0 K
- 1 K
- 2 K
Example:
+ 22 °C
+ 21 °C
Setpoint temp.
20 °C
+ 19 °C
+ 18 °C
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 118700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 118700 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 118700

Gira 118700 User Manual - German - 11 pages

Gira 118700 User Manual - Dutch - 12 pages

Gira 118700 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info