544879
17
Zoom out
Zoom in
Previous page
1/18
Next page
industrial controls
®
industrial controls
®
1720
Anschluss der Sicherheitsleiste (optional, nur bei gestecktem Komfortmodul!)
An der DC 3 Standard kann direkt eine elektrische-, pneumatische- oder optoelektronische
Sicherheitsleiste angeschlossen werden. Die Auswertelogik für die Schaltleiste ist bereits
im Komfortmodul integriert. Da nach den EU-Richtlinien eine pneumatische Schaltleiste vor
jedem Zulauf des Tores auf Funktion getestet werden muss, kann an die DC 3 ein
Vorendschalter angeschlossen werden, der die Testung einleitet, bzw. bei einer elektr.
Sicherheitsleiste von STOP mit Wiederauffahrt auf STOP umschaltet.
Anschluss einer pneumatischen Schaltleiste
(optional, nur bei gestecktem Komfortmodul!)
Um den gesamten elektrischen Kreis der pneumatischen Sicherheitsleiste überwachen
zu können muss im Gehäuse des Druckschalters ein Widerstand ( 3,3 bis 8,2 k ) mit dem
Öffnerkontakt des Druckschalters in Reihe geschaltet werden.
Beschaltung des Druckschalters (pneum. Schaltleiste)
48
49
P
3,3 bis 8,2 k
Anschluss des Druckschalters der pneumatischen Schaltleiste
46
47
Anschluss Vorendschalter
Der Vorendschalter wird an der Torführung so montiert, dass das zulaufende Tor den
Vorendschalter ( z.B. Positionsschalter PS-ECO mit Rollenhebel ) etwa 5 cm über dem
Boden betätigt. Nach der Betätigung des Vorendschalters kontrolliert die Steuerung das
korrekte Ansprechen der Sicherheitsleiste sowie das Öffnen des Endschalters in der ZU-
Richtung. Der Vorendschalter kann auch über einen zusätzlichen Öffnerkontakt im Antrieb
realisiert werden, auch hier muss der Kontakt ca. 5 cm über dem Boden öffnen.
Anschluss Vorendschalter
!
Jumper auf Grundplatine
(siehe Seite 20) und DIP-
Schalter Einstellung auf dem
Komfortmodul beachten!
(siehe Rückseite)
Anschluss einer Ampelanlage
Bei der DC 3 Standard besteht die Möglichkeit direkt eine Einfachampel (Rotampel)
anzuschließen.
1
2
3
PE
Ampel
Rot
N
L1
Stellung der Jumper auf der Grundplatine für Sicherheitsschaltleiste
1. nicht gesteckt: optoelektronische Schaltleiste
gesteckt: Widerstand 8 K oder Diode
2. nicht gesteckt: Totmann AUF - Richtung
gesteckt: Selbsthaltung AUF - Richtung
3. nicht gesteckt: Totmann ZU - Richtung
gesteckt: Selbsthaltung ZU - Richtung
Bei gestecktem Komfortmodul sind die Jumper 2 und 3 zu entfernen.
!
F
D
Version Frankreich
Betrieb nur bei gestecktem Komfortmodul. Die gestrichelten Brücken sind für die
Einschaltverzögerung mit Vorwarnung zu stecken.
Vor der Torbewegung wird 3 Sekunden eine
Vorwarnung durch Blinken der ROT-Ampel gegeben.
. . . . . . . . . .
. . . . . . . . . .
Bei einer DC 3 Standard ohne Komfortmodul kann die
Rotampel über einen zusätzlichen Endschalter (Schließer
Kontakt), über die Klemmen 54/55 geschaltet werden.
Hierzu ist der Jumper auf der 20-poligen Stiftleiste zu
stecken.
Steuerplatine
Jumper für Rot Ampel ohne Komfortmodul
Zur Verbesserung der Lampenlebensdauer kann in den
Nullleiter optional ein Widerstand von 39/2W eingesetzt
werden. Dieser Widerstand gilt bei einer Lampenleistung
von 25W.
Bei gestecktem Komfortmodul wird die Rotampel direkt
angesteuert.
1
23
UK
AUF
AB
Netz
S
t
a
n
d
a
r
d
17


Need help? Post your question in this forum.

Forumrules
1

Forum

geba-tronic-dc-3-eco---standard---de-luxe

Reset search

  • replacment had transmitters for gebatronic DC3 mini max 3 s Submitted on 31-1-2022 at 13:45

    Reply Report abuse
  • can i get replacemnt handheld transmitters for Gebatronic DC3 Mini Max 3S Submitted on 31-1-2022 at 13:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic DC 3 ECO - Standard - de Luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic DC 3 ECO - Standard - de Luxe in the language / languages: German as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geba Tronic DC 3 ECO - Standard - de Luxe

Geba Tronic DC 3 ECO - Standard - de Luxe User Manual - English - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info