544879

Geba Tronic DC 3 ECO - Standard - de Luxe Manual

1
Zoom out
Zoom in
Previous page
1/18
Next page
Instructions for Assembly and Use
Industrial Door Control DC 3
ECO - Standard - de Luxe
industrial controls
®
industrial controls
®
Dealer:
X 0364.1 05/03
GB
DIP-Switch on the Comfort module
With the DIP-Switches several operating modes can be programmed.
The programming is done by switching the corresponding switch in „ON“ position.
When reaching the desired position, which is signaled by the blinking of the red
LED, the jumper must be turned back in „OFF“ position. The signaling of the desi-
red position will be repeated 4 x. The position shown at last is now programmed.
1
2
3
4
5
6
ON
OFF
7
Switch 1: Display of door position 1x flashing
Traffic light control red/green 2x flashing
Switch 2: Function/ kind of Diode/resistor with free cruise 1x flashing
safety edge Diode/resistor with reverse 2x flashing
Attention ! Opto - elektronic with free cruise 3x flashing
Jumper position on mainboard! Opto - elektronic with reverse 4x flashing
DW-Test with free cruise 5x flashing
DW-Test with reverse 6x flashing
Switch 3: permanent light impuls 3 seconds 1x flashing
255 seconds 2x flashing
Switch 4: Prewarning for door moves immediately 1x flashing
France
Attention ! door moves delayed 2x flashing
Jumperposition on mainboard! (France)
Switch 5: Automatic closing function Photo beam starts closing time 1x flashing
only Standard & de Luxe Photo beam sets time to 5 sec. 2x flashing
Switch 6: automatic closing time 15 seconds 1x flashing
only Standard & de Luxe 30 seconds 2x flashing
1 minute 3x flashing
2,50 minutes 4x flashing
4,25 minutes 5x flashing
Switch 7: Test photo beam Test outside 1x flashing
only Comfort Test inside/outside 2x flashing
module S 2 Test off 3x flashing
The bold type values are pre-set during manufacturing
In he setting for France the door movement is prewarned by a permanent light impuls for
3 seconds, the traffic light RED flashes 3 seconds. The traffic light control activates during the
door movement to a permanenr RED signal.
only S2
1 …


Need help? Post your question in this forum.

Forumrules
1

Forum

geba-tronic-dc-3-eco---standard---de-luxe

Reset search

  • replacment had transmitters for gebatronic DC3 mini max 3 s Submitted on 31-1-2022 at 13:45

    Reply Report abuse

  • can i get replacemnt handheld transmitters for Gebatronic DC3 Mini Max 3S Submitted on 31-1-2022 at 13:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic DC 3 ECO - Standard - de Luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic DC 3 ECO - Standard - de Luxe in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geba Tronic DC 3 ECO - Standard - de Luxe

Geba Tronic DC 3 ECO - Standard - de Luxe User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info