589542
20
Zoom out
Zoom in
Previous page
1/28
Next page
User Profile: Allows you to access and customize your personal
statistics (Setting Up Your User Profile).
Language: Sets the language displayed on the device.
Time: Adjusts the time settings (Time Settings).
Backlight: Adjusts the backlight settings (Backlight Settings).
Sounds: Sets the device sounds, such as key tones, alerts, and
vibrations.
Units: Sets the units of measure used on the device (Changing
the Units of Measure).
GLONASS: The default satellite system option is GPS. You can
enable the GLONASS option for increased performance in
challenging environments and faster position acquisition.
Using the GPS and GLONASS options can reduce battery
life more than using the GPS option only.
Pos. Format: Sets the geographical position format and datum
options.
Format: Sets general format preferences, such as the pace and
speed shown during activities, and the start of the week.
Data Recording: Sets how the device records activity data. The
Smart recording option (default) allows for longer activity
recordings. The Every Second recording option provides
more detailed activity recordings, but may not record entire
activities that last for longer periods of time.
USB Mode: Sets the device to use mass storage mode or
Garmin mode when connected to a computer.
Restore Defaults: Allows you to reset user data and settings
(Restoring All Default Settings).
Software Update: Uses a WiFi connection to check for
software updates to the device.
About: Displays device, software, and license information.
Time Settings
Hold UP, and select Settings > System > Time.
Time Format: Sets the device to show time in a 12-hour or 24-
hour format.
Set Time: Sets the time zone for the device. The Auto option
sets the time zone automatically based on your GPS position.
Time: Allows you to adjust the time if it is set to the Manual
option.
Backlight Settings
Hold UP, and select Settings > System > Backlight.
Mode: Sets the backlight to turn on manually or for keys and
alerts.
Timeout: Sets the length of time before the backlight turns off.
Brightness: Sets the brighness level of the backlight.
Changing the Units of Measure
You can customize units of measure for distance, pace and
speed, elevation, weight, height, and temperature.
1Hold UP.
2Select Settings > System > Units.
3Select a measurement type.
4Select a unit of measure.
ANT+ Sensors
The device is compatible with these optional, wireless ANT+
accessories.
Heart rate monitor, such as HRM-Run (Putting On the Heart
Rate Monitor)
Bike speed and cadence sensor (Using an Optional Bike
Cadence Sensor)
Foot pod (Foot Pod)
Power sensor, such as Vector
tempe
wireless temperature sensor (tempe)
For information about compatibility and purchasing additional
sensors, go to http://buy.garmin.com.
Pairing ANT+ Sensors
The first time you connect a sensor to your device using ANT+
wireless technology, you must pair the device and sensor. After
they are paired, the device connects to the sensor automatically
when you start an activity and the sensor is active and within
range.
NOTE: If a heart rate monitor was bundled with your device, the
included heart rate monitor is already paired with your device.
1If you are pairing a heart rate monitor, put on the heart rate
monitor (Putting On the Heart Rate Monitor).
The heart rate monitor does not send or receive data until
you put it on.
2Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors
while pairing.
3Hold UP.
4Select Settings > Sensors > Add New.
5Select an option:
Select Search All.
Select your sensor type.
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data page loop or a custom data field.
Putting On the Heart Rate Monitor
NOTE: If you do not have a heart rate monitor, you can skip this
task.
You should wear the heart rate monitor directly on your skin, just
below your sternum. It should be snug enough to stay in place
during your activity.
1Snap the heart rate monitor module À onto the strap.
The Garmin logos on the module and the strap should be
right-side up.
2Wet the electrodes Á and the contact patches  on the back
of the strap to create a strong connection between your chest
and the transmitter.
3Wrap the strap around your chest, and connect the strap
hook à to the loop Ä.
NOTE: The care tag should not fold over.
16 ANT+ Sensors
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fenix 3 - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fenix 3 - 2015 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fenix 3 - 2015

Garmin Fenix 3 - 2015 User Manual - German - 30 pages

Garmin Fenix 3 - 2015 User Manual - Dutch - 30 pages

Garmin Fenix 3 - 2015 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info