589542
19
Zoom out
Zoom in
Previous page
1/28
Next page
increases battery life but decreases the quality of recorded
activities. You should use the UltraTrac feature for activities that
demand longer battery life and for which frequent sensor data
updates are less important.
Power Save Timeout Settings
The timeout settings affect how long your device stays in
training mode, for example, when you are waiting for a race to
start. Hold UP, select Settings > Apps, and select an activity.
Select Power Save to adjust the timeout settings for the activity.
Normal: Sets the device to enter low-power watch mode after 5
minutes of inactivity.
Extended: Sets the device to enter low-power watch mode after
25 minutes of inactivity. The extended mode can result in
shorter battery life between charges.
Watch Face Settings
You can customize the appearance of the watch face by
selecting the layout, colors, and additional data. You can also
download custom watch faces from the Connect IQ store.
Customizing the Watch Face
1Hold UP.
2Select Settings > Watch Face > Type.
3Select the digital or analog watch face, or an available watch
face downloaded from the Connect IQ store.
4If using the digital or analog watch face, select a feature to
change.
TIP: You can add additional data to the digital and analog
watch faces, including the date and day of the week. You can
also add the moon phase and a barometric trend arrow
indicating changes in air pressure to the digital watch face.
5Follow the on-screen instructions to change the watch face
feature.
Customizing the Widget Loop
You can show, hide, or move items in the widget loop.
1Hold UP.
2Select Settings > Widgets.
3Select a widget.
4Select an option:
Select Status to show or hide the widget from the widget
loop.
Select Move Up or Move Down to change the location of
the widget in the widget loop.
Sensors Settings
Compass Settings
Hold UP, and select Settings > Sensors > Compass.
Calibrate: Allows you to manually calibrate the compass sensor
(Calibrating the Compass).
Display: Sets the directional heading on the compass to letters,
degrees, or milli-radians.
North Ref.: Sets the north reference of the compass (Setting the
North Reference).
Mode: Sets the compass to use electronic-sensor data only
(On), a combination of GPS and electronic-sensor data when
moving (Auto), or GPS data only (Off).
Calibrating the Compass
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
Your device was already calibrated at the factory, and the
device uses automatic calibration by default. If you experience
irregular compass behavior, for example, after moving long
distances or after extreme temperature changes, you can
manually calibrate the compass.
1Hold UP.
2Select Settings > Sensors > Compass > Calibrate > Start.
3Follow the on-screen instructions.
Setting the North Reference
You can set the directional reference used in calculating
heading information.
1Hold UP.
2Select Settings > Sensors > Compass > North Ref..
3Select an option:
To set geographic north as the heading reference, select
True.
To set the magnetic declination for your location
automatically, select Magnetic.
To set grid north (000º) as the heading reference, select
Grid.
Altimeter Settings
Hold UP, and select Settings > Sensors > Altimeter.
Auto Cal.: Allows the altimeter to self-calibrate each time you
turn on GPS tracking.
Calibrate: Allows you to manually calibrate the altimeter sensor.
Calibrating the Barometric Altimeter
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometric altimeter if
you know the correct elevation or the correct sea level pressure.
1Hold UP.
2Select Settings > Sensors > Altimeter.
3Select an option:
To calibrate automatically from your GPS starting point,
select Auto Cal. > Once.
To calibrate automatically with periodic GPS calibration
updates, select Auto Cal. > Continuous.
To enter the current elevation, select Calibrate.
Barometer Settings
Hold UP, and select Settings > Sensors > Barometer.
Plot: Sets the time scale for the chart in the barometer widget.
Storm Alert: Sets the rate of barometric pressure change that
triggers a storm alert.
Navigation Settings
You can customize the map features and appearance when
navigating to a destination.
Customizing Map Features
1Hold UP.
2Select Settings > Navigation.
3Select an option:
Select Map to turn the map on or off.
Select Guide to turn on or off a guide page that shows the
compass bearing you should follow while navigating.
Select a screen to add, remove, and customize the data
screens shown while navigating.
System Settings
Hold UP, and select Settings > System.
Customizing Your Device 15
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fenix 3 - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fenix 3 - 2015 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fenix 3 - 2015

Garmin Fenix 3 - 2015 User Manual - German - 30 pages

Garmin Fenix 3 - 2015 User Manual - Dutch - 30 pages

Garmin Fenix 3 - 2015 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info