3592
34
Zoom out
Zoom in
Previous page
1/132
Next page
ENGLISH
• 34 •
11.1 Conventional descaling
Prepare the descaling solution by following the
directions provided on the product package.
With the machine off, remove the water tank,
empty it out and then fill it with the descaling
solution; fit the tank back into place in the
machine.
Turn on the machine by pressing the ON/OFF
switch.
Place an ample container beneath the steam
nozzle (14) and turn the hot water/steam knob
(16) anticlockwise; dispense about 3 dl of
descaling solution and turn the knob (16)
clockwise to shut off flow.
Turn off the machine by pressing the ON/OFF
switch and allow the solution to act for about
15 minutes.
Repeat the procedure until the tank has been
completely emptied of the descaling solution.
After descaling the machine, thoroughly rinse
the water tank (9) and fill it with fresh drinking
water.
Turn the machine back on and thoroughly
rinse out the water lines by discharging water
(approx. 1.4 litres) from the steam nozzle (14)
as described in section 8. This serves to elimi-
nate any residues that might affect coffee
flavour.
The machine is again ready for use. To clear
the message
DESCALING
press “ENT” to access the programming
mode.
press
or
to select the function:
SIGNAL. DESCAL.
and enable it by pressing “ENT”.
The following message will appear:
SIGNAL. DESCAL.
NO
Press “
” or “
” to select the function:
SIGNAL. DESCAL.
YES
Press “ENT again to reset the scale counter.
Quit the programming mode by pressing “ESC.
11.2 Automatic descaling
Prepare the descaling solution by following
the directions provided on the product
package.
With the machine on, remove the water tank,
empty it out and then fill it with the descaling
solution; fit the tank back into place in the
machine.
• Press “ENT”. Press
or
to select the
function:
DESCALING
and enable it by pressing “ENT”.
Place an ample container (min. 1 litre capacity)
beneath the steam nozzle (14) and turn the
hot water/steam knob (16) anticlockwise. The
machine will display the message:
MACHINE IS
DESCALING
and the automatic descaling program will start.
Descaling is carried out at intervals until the
display indicates:
DESCALING
FINISHED
Turn the hot water/steam knob (16) clockwise
and press “ENT”.
The following message will appear:
RINSE MACHINE
FILL WATERTANK
Now thoroughly rinse the water tank, fill it with
fresh drinking water and fit it back in place in
the machine.
Again place an ample container beneath the
steam nozzle (14) and turn the hot water/
steam knob (16) anticlockwise. Slowly draw
out all the contents of the tank through the
steam nozzle (14) until the machine displays
the message:
RINSING
MACHINE
34

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Syncrony Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Syncrony Digital in the language / languages: Dutch as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info