3592
32
Zoom out
Zoom in
Previous page
1/132
Next page
ENGLISH
• 32 •
In this way, the appliance will be programmed
to brew the quantity of coffee you selected.
8 DISPENSING HOT WATER
Caution: hot sprays may be
discharged at the start – scalding
hazard! The hot water nozzle and tube can
reach high temperatures: avoid touching
them directly with your hands.
Before attempting to dispense hot water, make
sure that the display shows.
SELECT PRODUCT
READY FOR USE
When the machine signals that it is ready to
brew coffee, carry out the following steps.
Place a cup and/or receptacle beneath the
hot water/steam nozzle (Fig.09).
Turn the knob anticlockwise as shown in
Fig.09. The display will show:
HOT WATER
Dispense the desired quantity of hot water; to
stop the flow of hot water turn the knob
clockwise. The display will show:
SELECT PRODUCT
READY FOR USE
9 DISPENSING STEAM /
PREPARING CAPPUCCINO
Steam can be used to froth the milk
for cappuccinos and also to heat
beverages.
Scalding hazard!
Hot sprays may be discharged at the
start – scalding hazard! The hot water nozzle
and tube can reach high temperatures:
avoid touching them directly with your
hands.
When the machine is ready to brew coffee,
press the button (26). The machine will take
some time to warm up.
During this time the display will show:
STEAM
WARMING UP
When the machine is ready to dispense steam,
the display will show:
STEAM
READY FOR USE
• Direct the steam tube (14) over the drip tray
(12), place a cup or other suitable receptacle
beneath the steam nozzle. Open the “Hot
water/steam” knob (16) for a few instants to
discharge any residual water from the steam
nozzle; in a short while only steam will issue
from the tube.
Turn the knob (16) to OFF.
Fill the receptacle you wish to use for making
cappuccino to 1/3 with cold milk.
For best results when making
cappuccinos, the milk and the cup
used should be cold.
Immerse the steam nozzle into the milk to be
frothed and turn the knob (16); turn the
container slowly with up-down movements
to achieve uniform frothing (Fig.10).
After using the steam for the desired time, shut
off the steam (16).
The same method can be used to heat other
beverages.
Clean the steam nozzle with a damp cloth .
When you have finished dispensing steam, turn
off the function by pressing the button (26).
9.1 Switching from steam to coffee
• When you switch from the steam dispensing
function to the coffee brewing function, the
display will show:
OVERTEMPERATURE
the machine is overheated and cannot make
coffee.
In order to make coffee, you must discharge
32

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Syncrony Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Syncrony Digital in the language / languages: Dutch as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info