768985
27
Zoom out
Zoom in
Previous page
1/176
Next page
27
• ENGLISH • • ENGLISH •
SAFETY HARNESS
Apply the brake before placing your baby in the pushchair.
Release the buckle (g. 36): press buon “a” and remove the components
Fasten the buckle (g. 37): by inserng part A in part B, a click will indicate that it has been
fastened correctly.
WARNING: Never use the crutch strap without the lap belt.
WARNING: for babies under 6 months of age, the backrest must be only in the fully reclined, horizontal posion at all
mes, seat reaward facing (g. 34).
WARNING: If baby is less than 6 months old, the harness belts must rst be inserted through the lower slots and then
through the rings of the harness regulang buckle (g. 35).
FOLDING THE STROLLER (g. 38, 39)
Before folding the stroller, ensure that:
The backrest is adjusted to the vercal posion
The canopy is closed back up
The front wheels are in swivel mode.
Push the stroller forwards to direct the front wheels longitudinally.
Li up the lever “a” and at the same me push downwards (g. 38).
Move buon “a” to the le, as shown in the gure, while pressing buon “b” at the same me.
Fold the handlebar downwards(g. 39). IMPORTANT: hold the handlebar unl it is on the ground.
Bring the front wheel chassis towards the back.
Fold up the footrest.
Make sure it is closed properly.
USING THE TRAVEL SYSTEM ACCESSORIES
The TALENT pushchair can be used with the following travel system accessories, TALENT carrycot and TALENT infant car
seat. Remove the seat from the chassis (see the paragraph “Fing the seat”).
USING THE INFANT CAR SEAT AND CARRYCOT TRAVEL SYSTEM ACCESSORIES (g. 40, 41)
IMPORTANT: the travel system accessories must be secured to the chassis only in the parent facing.
NAVICELLA MORBIDA
EN 1466:2014 + AC:2015
ASSEMBLING THE FRAME
Li up the handle, a click will indicate that it is locked in the vercal posion. Make sure that it is locked (g. 43).
Press the boom of the carrycot downwards and at the same me pull the handle upwards to raise the sides of the
carrycot (g. 44).
Pull the frame support brackets towards the outside of the carrycot, using the straps, unl they lock into the 4 clips.
Make sure that the brackets are locked into the 4 clips (g. 45, 46).
Fold the fabric on the side towards the inside of the carrycot, aach the Velcro in the lower part along the inner edge.
Make sure that the fabric is properly secured with Velcro and that there are no openings along the side (g. 47).
Place the maress inside the carrycot (g. 48).
ASSEMBLING THE HOOD
Place the hood on the handle, wrap the front fabric of the hood around the handle, aach and close the zip. Aach the
press studs (g. 49, 50).
USE
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foppapedretti Talent at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti Talent in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info