768985

Foppapedretti Talent Manual

26
Zoom out
Zoom in
Previous page
1/176
Next page
26
• ENGLISH • • ENGLISH •
ASSEMBLY - USE
FASTENING THE SEAT (for use as a pushchair)
Disassembling the seat (g. 21): press the buons “a” on both sides and remove the seat by liing it up.
Fing the seat: to t the seat, place it in the posion shown in the gure 22. Line up and insert the plasc connectors
of the seat in the slots provided on the pushchair chassis. Press unl a click is heard indicang that it has been fastened
correctly.
WARNING: Before use, always check that both the seat supports are fastened correctly to the chassis.
When the seat is lied upwards, it must not detach from the chassis.
Removing the seat (g.21): press buon “a” on both sides and remove the seat by liing it.
REVERSIBLE SEAT (g. 23)
Remove the seat by liing it, see the paragraph “INSTALL THE SEAT”.
Posion the seat so that it is forward facing or parent-facing.
Replace the seat on the chassis of the pushchair, see the paragraph “ng the seat” for correct assembly.
USE
HOW TO OPEN THE PUSHCHAIR (g. 24, 25, 26, 27)
Move the closing lever “a”, as shown in the gure (g. 24).
Li the handlebar unl the chassis opens completely. A click will indicate that is has been fastened (g. 25).
Li up the seat unl you hear a CLICK (g. 26).
Li up the lever “b” and at the same me push the backrest upwards unl you hear a CLICK, this will indicate that it is in
place correctly. Li up the protecve armrest. A click will indicate that it is locked (g. 27).
WARNING: Before use, pull the seat upwards to check that it has been fastened correctly to the chassis.
Before using the stroller, make sure it is opened properly and the mechanisms are properly locked (g. 35).
TO REGULATE THE BACKREST (g. 28)
Li the regulang lever “a” located behind the backrest and recline the backrest to the required posion. Release the lever
and make sure the backrest is secured in posion.
WARNING (g. 29): For babies under 6 months of age, the backrest must only be in the fully reclined, horizontal posion
at all mes.
PARKING BRAKE (g. 30)
To apply the brake: Press the brake lever, push the pushchair forward gently to ensure the brake has been applied correctly.
To release the brake: li the lever.
FOOTREST ADJUSTMENT (g. 31)
Press the lever “A”, under the footrest, and adjust the footrest to the chosen posion.
ADJUSTING THE HOOD (g. 32)
The hood can be adjusted to 3 dierent heights.
Press the buon “a” on the back of the hood (g. 33), on both sides, and raise or lower the hood to posion it at the
desired height.
Make sure that the hood is locked in the new posion at both sides.
Unfold the hood according to your needs, to protect the child from sunlight.
NOTE: babies’ skin is very delicate. NEVER leave baby under direct sunlight. Always make sure that the hood has been
adjusted correctly.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foppapedretti Talent at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti Talent in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info