768985

Foppapedretti Talent Manual

25
Zoom out
Zoom in
Previous page
1/176
Next page
25
• ENGLISH • • ENGLISH •
UNFOLD THE STROLLER
CAUTION: make sure that the child, and any other children, are at a safe distance away when carrying out this step.
The moving parts of the stroller must not for any reason come into contact with the child’s body.
Move the closing lever “a”, as shown in the gure (g.1).
Li the handlebar unl the chassis opens completely. A click will indicate that is has been fastened.
Li up the seat unl you hear a CLICK (g. 2).
Li up the lever “b” and at the same me push the backrest upwards unl you hear a CLICK, this will indicate that it is in
place correctly.
Before using the stroller, make sure it is opened properly and the mechanisms are properly locked
INSTALL FRONT WHEELS (g. 3)
Fing the front wheels (g. 4): Insert the end bushing into the slot situated in the center of the wheel block.
A click will indicate that it is inserted correctly.
Check that both the wheels have been fastened correctly, if they are pulled downwards they should not be released.
Move lever “a” downward to block the swivel movement, and upward to acvate the swivel movement (g. 4).
Removing the front wheels (g.5): Press the steel buon “b” front wheel released.
REAR WHEELS (g. 6)
Insert the wheel pin in the hole, a click will indicate it has been fastened in place. Make sure that the wheel has been
secured correctly, it should not come away when it is pulled outwards.
Removing the rear wheels (g. 7): Press the metal lever “a” on the wheel hub and, at the same me, remove the wheel.
FITTING THE BUMPER BAR
Fing the bumper bar (g. 8, 9): Li up the two aachment points for the handlebar, a CLICK will indicate that they are
locked. Line the bumper bar up with the slots and press on both sides. A click indicates that it has been fastened correctly.
Removing the bumper bar (g. 10): press buon “a” on both sides of the bumper bar and at the same me pull to remove it.
Opening the bumper bar on just one side (g. 11): press buon “a” on one side of the bumper bar and pull to open it
like a gate.
FITTING THE FOOTMUFF (g. 12)
Insert the lower part of the footmu on the seat of the chassis.
Fold the upper part of the footmu around the bumper bar.
Secure the footmu to the chassis of the pushchair using the press fasteners. Aach the press studs on both sides.
FITTING THE PUSHCHAIR RAINCOVER (g. 13)
Fit the raincover over the hood.
Fasten the edges at the back of the raincover using the Velcro tabs.
Fasten the front of the raincover to the chassis of the pushchair using the press studs.
STORAGE BASKET
Disassembly: unhook the 2 rear press studs as shown in g. 14.
Open the zips from both sides as shown in g. 15.
Remove the front straps from the buckles as shown in g. 16, then repeat this process for the straps on the back as shown
in g. 17.
Assembly: repeat this process in reverse order.
FITTING THE HOOD
Fing the hood (g. 18): fasten the hood support to both sides of the chassis.
Fasten the press fasteners of the hood behind the backrest.
Removing the hood (g. 19, 20): pull and release the hood support from both sides of the chassis.
ASSEMBLY
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foppapedretti Talent at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti Talent in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info