574923
13
Zoom out
Zoom in
Previous page
1/89
Next page
PDC 18/4
13
GB
4 Machine features
Accessories shown or described are sometimes not
included in the scope of delivery.
The specified illustrations appear at the beginning
of the Operating Instructions.
5 Intended use
Cordless impact drills are suitable for
drilling in metal, wood, plastic and similar mate-
rials,
impact drilling into walls, concrete and similar
building materials,
inserting and tightening screws
Charger TCL 3 suitable for
charging Festool battery packs: BP, BPS and
BPC (NiMH, NiCd, li-ion are recognised automat-
ically.)
indoor use only.
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
6Operation
6.1 Charger cable holder[3-2]
Unwind the cable completely from the recess
before using the charger.
6.2 Changing the battery pack
Inserting the battery pack [2 A]
Removing the battery pack[2 B]
L
Battery pack is ready for use immediately upon
delivery and can be charged at any time.
6.3 Charging the battery pack [3]
The LED
[3-1]
on the charger indicates the respec-
tive operating status of the charger.
Charger TCL 3
Mains voltage (input) 220 - 240 V ~
Mains frequency 50/60 Hz
Charging voltage (output) 10.8 - 18 V=
Rapid charging max. 3 A
Conservation charging, inter-
mittent (NiCd, NiMH)
approx. 0.06 A
Charging times for BP, BPS and BPC battery
packs
Li-ion 1.5 Ah, 80 %/100 % approx. 25/35
min.
Li-ion 3.0 Ah, 80 %/100 % approx. 55/70
min.
Li-ion 4.2 Ah, 80 %/100 % approx. 70/90
min.
Permitted operating tempera-
ture range
-5 °C to + 45 °C
Temperature monitoring via NTC resistor
Safety class / II
Battery pack BPC 18 Li
Voltage 18 V
Capacity 4,2 Ah
Weight 0,7 kg
[1-1]
LED light switch
[1-2]
LED lamp
[1-3]
Bit store
[1-4]
On/Off switch
[1-5]
Clamping sleeve
[1-6]
Drilling/impact drilling selector switch
[1-7]
Gear switch
[1-8]
Torque thumbwheel
[1-9]
Right/left switch
[1-10]
Belt clip
[1-11]
Button for releasing the battery pack
[3-1]
LED-Display
[3-2]
Cable holder
[4]
Wall mount
LED yellow - lit continuously
Charger is ready to use.
LED green - flashes quickly
Battery pack is charged to maxi-
mum capacity.
LED green - flashes slowly
Battery pack is charged with
reduced current. Li-ion is
charged to 80 %.
LED green - lit continuously
Charging is complete or is not
restarted as current charge sta-
tus is greater than 80%.
LED red - flashes
General fault indication, e.g.
incomplete contact, short circuit,
defective battery pack, etc.
LED red - lit continuously
Battery temperature is outside
the permitted range.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool PDC 18.4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool PDC 18.4 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info