Manual Ferm BGM1002 - FSM125 (page 4 of 18) (English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish)

632947

Zoom out

Zoom in

1/18

REPLACING THE GRINDING STONE

Fig. C.

Disconnect the machine and make sure the

grinding stone has stopped before replacing the

grinding stone. Disconnect the machine and

make sure the grinding stone has stopped befo-

re replacing the grinding stone.

Required tools:

- spanner, 19 mm;

- spanner, 8 mm;

- screwdriver.

- Remove the guards, using the above tools. When re-

placing the stones, remember the right-hand spindle is

fitted with right-hand thread, the left-hand spindle with

left-hand thread.

- Loosen the nut by means of the spanner. Remove the

stone.

- Clean the flanges. Replace one flange, with the conca-

ve side facing the grinding stone. Slide the new grin-

ding stone on to the spindle. Replace the second flan-

ge on the spindle,

with the concave side facing the grinding stone. Tigh-

ten the nut securely, but not too tightly! Replace the gu-

ards and adjust the tool rest. Let the motor run for a few

seconds before you start to grind.

OPERATION

SELECTING THE GRINDING STONE

In general, coarse grinding stones are used to remove ma-

terial and fine grinding stones to finish the workpiece. If the

surface is uneven, start with the coarse grinding stone un-

til the surface is smooth. Then use the fine grinding stone

to remove any scratches caused by the coarse grinding

stone to finish the workpiece.

GRINDING

Do not “fill up” the stone by holding wood, lead or any other

soft metal against the grinding stone. Never press the

workpiece too hard against the stone, to avoid making

grooves. Cool down the workpiece with water. Wood chi-

sels and such must never “blue” when being ground. Make

sure the workpiece cannot slip from your fingers during

grinding and get caught between the tool rest and the sto-

ne. This may cause the stone to crack, the motor to stall

and the workpiece to rebound, causing injuries.

OPERATION

- Make sure the switch is in the “OFF” or “0” position be-

fore you plug in the machine.

- Move the switch to the “ON” or “1” position to start the

bench grinder.

- Keep the cable away from moving parts.

4 Ferm

GARANTI

Lœs det separat vedlagte garantikort for garantibetingel-

serne.

ClEl

KONFORMITETSERKLÆRING

(

)

Vi erklærer at under almindeligt ansvar, at dette

FSM-125

er i overenstemmelse med følgende normer eller

normative dokumenter

EN61029-1, EN61029-2-4, EN55014-1, EN55014-2,

EN61000-3-2, EN61000-3-3

i henhold til bestemmelserne i direktiverne:

98/37/EC, 73/23/EEC, 89/336/EEC,

2002/95/EC, 2002/96/EC

01-03-2007

ZWOLLE NL

J.A. Bakker - van Ingen

CEO Ferm BV

J. Lodewijk

Quality Manager

Ferm Global

Det er vores hensigt til stadighed at forbedre vores pro-

dukter, og vi forbeholder os derfor til enhver tid retten til at

ændre produktspecifikationerne uden forudgående var-

sel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle

The Netherlands

Ferm 33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BGM1002 - FSM125 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BGM1002 - FSM125 Manual

Product: