632947

Ferm BGM1002 - FSM125 Manual

3
Zoom out
Zoom in
Previous page
1/18
Next page
34 Ferm
PRODUCT INFORMATION
Fig. A.
1. On/off switch
2. Support (Right)
3. Cover glass
4. Cover glass holder
5. Screw
6. Support (Left)
TECHNICAL SPECIFICATIONS
Voltage 230 V
Frequency 50 Hz
Power input 120 W
No load speed 2950/min.
Grinding stone dimensions 125 x 16 mm
Spindle hole 12,7 mm
Weight 5 kg
Lpa (sound pressure) 76 dB(A)
Electrical safety
Always check that the power supply corresponds to the
voltage on the rating plate.
Replacing cables or plugs
Immediately throw away old cables or plugs when they ha-
ve been replaced by new ones. It is dangerous to insert the
plug of a loose cable in the wall outlet.
Using extension cables
• The grinding machine is fitted with a three-core cable
and earthed plug. Therefore, always connect the plug
to an earthed socket. If you have to use an extension
cable, make sure it is three-core and fitted with an eart-
hed plug and connector.
• The minimum conductor size is 1.5 mm
2
.
INSTALLATION
Fig. B.
The holder of a cover glass, together with the co-
ver glasses themselves will always be adjus-
ted/mounted with the grinding stone being out of
action and the current turned out.
The grinding machine has to be secured to the bench by
means of bolts. The length of the bolts depends on the
thickness of the bench. If your bench is made of steel, it is
best to place the machine on a supporting, wooden plate
to separate it from the bench, to avoid vibrations.
MOUNTING AND ADJUSTMENT THE COVER GLAS-
SES AND HOLDERS
- Mount the holder of the cover glass together with the
cover glass itself, by means of the screw (A).
- Adjust the height of the holder of the cover glass by
loosening a bit screw . The free space between the sto-
ne and the holder of the cover glass will amount to 1 -
1,5 mm.
- Fasten well screw (A).
- Adjust the cover glass (see the figure above) in such a
way that your face will be protected, at the utmost.
- Use always safety glasses.
ADJUSTING THE TOOL REST.
Disconnect the machine and make sure the
grinding stone has stopped before adjusting the
tool rest.
Secure the tool rest, allowing a maximum clearance (C)
between the tool rest and the grinding stone of 1 -1.5 mm.
B) 1 - 1,5 mm
C) 1 - 1,5 mm
A
4
3
1
2
3
4
5
6
Ferm 3
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm BGM1002 - FSM125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BGM1002 - FSM125 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info