580132

Eden HA2000 RTC Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
UN PROBLEME ?
8
N’hésitez pas à nous appeler sur notre ligne d’assistance téléphonique (tel en fin de notice).
Nos techniciens se feront un plaisir de vous aider à parfaire votre installation.
message.
VI. Erase Messages
To erase a particular stored message,
follow the steps below:
Step 1. Press “REC” key when the Dialer is in
Normal Mode to enter Recording mode.
YELLOW LED flashes.
Step 2. Enter “Message Number” (1 or 5).
Step3. Press “CLR” to erase that message and
the Auto Dialer will sound 2 short beeps
to indicate successful deletion.
To erase all stored messages:
Step 1. Press “REC” key when the Dialer is in
Normal Mode to enter Recording mode.
YELLOW LED flashes.
Step 2. Press “0”
Step 3. Press “CLR” again to hear 2 short beeps
to indicate successful deletion.
Testing your Dialer
I. Test Dial the Telephone Numbers
I. Test Dial the Telephone Numbers I. Test Dial the Telephone Numbers
I. Test Dial the Telephone Numbers
for Reporting
for Reportingfor Reporting
for Reporting
To test dial the telephone numbers, follow
the steps below.
Step 1. Press “TEST” key when the Dialer is in
Normal Mode to enter Test mode.
The YELLOW LED starts to flash.
Step 2. Enter “Priority Order Number” (11~16
or 21, 22, 31, 32, 41, 42).
The Dialer will dial the phone number as
instructed and play the message
accordingly.
The RED LED lights up during dialing
and reporting.
<
<
N
N
O
O
T
T
E
E
>
>
To identify line failure make sure
message have been recorded and that
you have stored a telephone number to
test dial
Test timer is 85 seconds
I
II
II
II
I.
. .
. Test Play the Messages
Test Play the MessagesTest Play the Messages
Test Play the Messages
To test play one particular message:
Step 1. Press “TEST” key when the Dialer is in
Normal Mode to enter Test mode.
The YELLOW LED starts to flash.
Step 2. Press “0”
Step 3. Enter “Message Number” (1 ~ 5).
The Dialer will playback the recorded
message as instructed.
The RED LED lights up while the
message is played.
To test play all recorded messages:
Step 1. Press “TEST” key when the Dialer is in
Normal Mode to enter Test mode.
The YELLOW LED starts to flash.
Step 2. Press “0”
Step 3. Press “0” again and the Dialer will play
back all recorded messages in the order
of its Message Number.
The RED LED lights up while the message is
played.
III. Range Test
III. Range TestIII. Range Test
III. Range Test
Step 1. Press “TEST” key when the Dialer is in
Normal Mode to enter Test mode.
The YELLOW LED starts to flash.
Step 2. Press “＊
＊＊
＊”
The Dialer enters “Range Test” mode.
Both LEDs start to flash together.
Step 3. Send a signal from the Control Panel to
the Auto Dialer.
The Dialer will play a short tune twice to
indicate it has successfully received at
this distance range.
Step 4. Press “CLR” to exit Test mode.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eden HA2000 RTC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eden HA2000 RTC in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eden HA2000 RTC

Eden HA2000 RTC User Manual - German - 9 pages

Eden HA2000 RTC User Manual - Dutch - 10 pages

Eden HA2000 RTC User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info