580132
4
Zoom out
Zoom in
Previous page
1/9
Next page
UN PROBLEME ?
6
N’hésitez pas à nous appeler sur notre ligne d’assistance téléphonique (tel en fin de notice).
Nos techniciens se feront un plaisir de vous aider à parfaire votre installation.
“7” for Pin 1
Step3. Enter “Polarity Designated Number”
“0” for “ - “ polarity (Default)
“1” for “ + ” polarity
Step 4. Press “CLR” to exit to Normal mode or the
Auto Dialer will automatically exit this
mode when 5-second time out is up.
V. Getting Started
Learn HA2000RTC
Step 1. Put the Dialer in Learn Mode by pressing
“TEST” and “9”. Yellow LED will start to
flash.
Step 2. Please enter the submenu “Program
Siren” of “Devices +/-“ from the Control
Panel HA2000, then select “Learn Siren”,
press OK” to send a signal to the Auto
Dialer (HA2000RTC).
Step 3. The Auto Dialer will recognize the signal
as the learn code and sound one long
beep and two short beeps to indicate the
learning process is completed
Step 4. Press “CLR” on the Auto Dialer to exit
Learn Mode.
<
<
N
N
O
O
T
T
E
E
>
>
The learning code is stored into
EEPROM and will not be lost during
power failure.
The Auto Dialer will sound 2 sets of
continuous 2 beeps if the Learning Code
has been received previously.
The Auto Dialer automatically exit Learn
Mode after a 3-minute Time Out.
By Pressing “TEST”, “9” and *”, Control
Panel will be removed from the Auto
dialer..
Learn HA2000SOS
Step 1. Put the Dialer in Learn Mode by pressing
“TEST” and “9”. Yellow LED will start to
flash.
Step 2.
Press the button on HA2000SOS to
transmit the signal.
Step 3. The Auto Dialer will recognize the signal
as the learn code and sound one long
beep and two short beeps to indicate the
learning process is completed
<
<
N
N
O
O
T
T
E
E
>
>
Iif the HA2000RTC has been learnt in,
you must remove it to learn HA2000SOS,
and vice versa.
The Auto Dialer will sound 8 short beeps
indicating either HA2000SOS or Control
Panel has been learnt-in and must be
removed first.
By Pressing “TEST”, “9” and “*”,
HA2000SOS will be removed from the
Auto dialer..
Configuring your Dialer
I. Store Telephone Numbers
To store the telephone numbers, follow the steps
below.
Step 1. Press key when the Dialer is in
Normal mode to enter Programming
mode.
The YELLOW LED will flash.
Step 2. Enter “Priority Order Number” (1~6).
Select Your Priority Order Number:
A) By Singular Sequence:
11, 12, 13, 14, 15, 16
B) By Alarm Event:
1) Burglar/Panic/Technical:
21, 22
2) Fire/ Gas: 31, 32
3) Medical: 41, 42.
If the Priority Order Number is selected by
Alarm Event, the Dialer will dial the
programmed phone number depending on
the type of alarming signal received.
No
If no phone number has been stored for a
particular Alarm Event, the dialer will
automatically dial in sequence of other
available Alarm Event phone numbers in
regardless of the original Alarm signal
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eden HA2000 RTC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eden HA2000 RTC in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eden HA2000 RTC

Eden HA2000 RTC User Manual - German - 9 pages

Eden HA2000 RTC User Manual - Dutch - 10 pages

Eden HA2000 RTC User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info