Manual Doro Primo 414 (page 1 of 2) (English)

657874

Zoom out

Zoom in

1/2

2. Insert the SIM card

(necessary)

Insert the SIM card by

carefully sliding it

under the metal bracket

unl it is in place. Make sure

that the SIM card’s contacts are

facing downwards and that the

cut-o corner is posioned according to how it

is shown in the gure. Do not scratch or bend

the card contacts. Try not to touch the contacts

with your ngers.

1. Receiver/

loudspeaker

Make phone calls holding the

cell phone to the ear

2. Display

3. Speed dial

buons

Speed dial the numbers saved

under M1, M2 and M3 with a

single keystroke

4. Le so key To open the main menu

5. Call key Make and answer calls;

To open the call list

6. Arrow

buons

Press to open shortcuts;

press , to open the phone-

book;

Scroll up and down in the menus

7. Microphone

8. Camera key To start the camera funcon.

To acvate the camera

9. End key Press to end a call;

Press to return to standby mode;

Press and hold to

turn the phone

on and o

10. Numerical

keys

Press to enter phone numbers;

Press and hold key 1 to call your

voice mailbox (phone number

must be stored);

when wring, press to input

numbers or characters

11.

key Press to enter

“*”/ “+” / “P”/“W“;

When wring, press to enter

special characters

12.

key Press and hold to toggle

between Vibraon and

Normal mode

13. Headset

socket

For 3.5 mm standard headset

14. Switch for

light

Switch light on and o

15. Exterior display

16. Supple-

mentary

light

For photos with supplementary

light, for dark environments, etc.

17. Camera

18. Emergency call buon

19. Speaker

20. Micro USB

port

For charger

21. + and - keys Adjust ring volume and loud-

speaker volume

22. Contacts for charging staon

Install the SIM card, memory card and the

baery

The SIM and memory card holders are located inside

the baery compartment.

CAUTION

Only use baeries, charger and accessories that

have been approved for use with this parcular

model. Connecng other accessories may be

dangerous and may invalidate the phone’s type

approval and guarantee.

1. Remove the cover

by placing your thumb

on the back of the

phone casing and

sliding it downwards.

If the baery is

installed, slide your

ngernail in the notch

next to the baery to

li it up.

QSG_Primo_by_Doro_414_en_(392x297)_v1.0

English

Manufactured, distributed or sold by IVS GmbH, Im

Frauental 14, 92224 Amberg, Germany. Primo by Doro ®

and Doro ® are trademarks owned by the company

Doro AB.

Technical specicaons

Network:

GSM 900/1800/1900 MHz

Dimensions:

102 mm x 50 mm x 20 mm

Weight:

99 g

Battery:

3.7V/1050 mAh Li-ion baery

Operating ambient

temperature:

Min: 0°C (32°F)

Max: 40°C (104°F)

Charging ambient

temperature:

Min: 0°C (32°F)

Max: 40°C (104°F)

Storage temperature:

Min: -20°C (-4°F)

Max: 60°C (140°F)

Changes and errors excepted.

Tip: some funcons require addional storage

space. Some features require extra memory, to

expand your phone’s storage capacity, install a

micro SD card.

3. Micro-SD card

(optional)

Lightly press the card

holder and push it

carefully towards the

corner of the

compartment. The

card holder can now be ipped up vercally.

Place the memory card in the plasc bracket.

Make sure that the memory card contacts are

facing down and that the card is posioned

according to the marked area (see gure). Do

not scratch or bend the card contacts. Push the

metal holder back down, press it at and slide

it unl it snaps into place.

IMPORTANT!

Use only compable memory cards with this device.

Compable card type: microSD, microSDHC.

Incompable cards may damage the card itself,

the device and corrupt any data stored on the

card. Depending on the market, some phones

may have a pre-installed memory card.

4. Insert the battery

(necessary)

Push it into the

baery compartment

and ensure that the

three contacts on the

baery touch the

three spring contacts in the baery

compartment.

5. Replace the cover.

When the baery performance is low and the

phone is sll on, the empty baery symbol ashes

to indicate the baery state and an alarm signal will

sound. To recharge the baery, connect the mains

adapter to the micro USB connector properly on the

right side of the phone.

Alternavely, you can place the telephone in the

charging cradle, which is connected to the mains

adapter via the USB cable.

The baery charge icon moves during charge (visible

in the upper right corner of the display). It takes

approximately 3 hours to fully charge the baery.

The charge icon stops moving when fully charged.

Note: If the baery is not suciently charged, the

phone will switch itself o. Aer the baery is fully

charged, the phone must then be switched on

manually.

Power on the phone

Press and hold the red key on the phone for at

least two seconds to turn it on or o.

If the SIM card is valid and protected with a PIN code

(Personal Idencaon Number),

Enter PIN

will be

displayed.

Make calls

1. Enter the phone number including the area

code. You can delete digits with

Delete

2. Press to dial. Press

End

to end a call.

3. Press to end the call.

Tip: Always enter a + sign before the internaonal

dialling code to be able to use the phonebook

properly in every country.

Press the

key twice to enter the internaonal

area dialling code +.

Answer a call

1. Press or

Answer

to answer a call or press

Cancel

to cancel the call (engaged tone).

Alternavely, you can press

to reject the

call directly.

2. Press to end the call.

Create phonebook entry

1. Press

Phonebook

2. Select

Enter new contact

3. Choose whether the contact should be saved on

the SIM card or the phone.

4. Enter a name for the contact.

5. Press .

6. Enter the phone number including the area

code.

7. When saving a new contact to the phone,

you can also save two addional numbers

(home and work).

8. Press

Save

Note: You can also assign a dierent ringtone to

each contact.

Tip: Always enter a + sign before the internaonal

dialling code to be able to use the phonebook

properly in every country.

Press the

key twice to enter the internaonal

area dialling code +.

Enter the PIN code and press

(

top le on the keypad). You can delete digits

using

Delete

( top right on the keypad).

Set language

The phone’s menu language is determined by the

SIM card by default. You can always switch between

the languages supported by the phone.

1. Press

Sengs

2. Choose

Phone Sengs

3. Choose

Language

4. Choose the desired

language

from the list

followed by

Set me and date

Press

Sengs

2. Set

me/date

3. Select

Set me/date

4. Enter the me (HH:MM) â .

5. Enter the date (DD.MM.YYYY) â .

6. Select

Speed dial buons (M1, M2, M3)

Note!

The contacts for the speed dial keys must

have already been saved to the phonebook.

Seng M1, M2, M3

Press

Phonebook

Choose a contact for the

key.

Note: Pressing the M1, M2 or M3 key enables you

to easily add a contact.

2. Press

Opons

Set speed dial

3. Choose the line

â Save.

4. Conrm the queson

Save?

with

Yes

Emergency calls (local, naonal, internaonal)

As long as the phone is switched on, it is always

possible to place an SOS call by entering the main

local emergency number for your present locaon

followed by

Some networks accept calls to emergency numbers

without a valid SIM card. Contact your service

provider for more informaon.

Note! Credit is NOT required – but the SIM card

must be registered and acvated.

Emergency numbers are only intended for urgent

assistance, and should only be called in an

emergency. Please do not misuse the emergency

number as this may prevent someone with a real

emergency from geng through.

Volume control

You can set the volume during a call using the side

buons

+/–

. The volume level is shown on the

display.

Tip: You can easily switch the exterior display on or

o temporarily using the side buons +/-.

For example: to check the me, missed calls and

new SMS / MMS messages.

Primo™ 414

Operang instrucons

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Doro Primo 414 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro Primo 414

Doro Primo 414 User Manual - German - 2 pages

Doro Primo 414 User Manual - Dutch - 66 pages

Doro Primo 414 User Manual - French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Doro Primo 414 Manual

Product: