615478

Denver SC-17 Manual

5
Zoom out
Zoom in
Previous page
1/62
Next page
ENG 6
ENGLISH
ENG 7
ENGLISH
Setup – Vox function
The VOX feature allows you to disable the display of the parent unit and activate it when the
baby unit (camera) captures a noise, such as baby's crying. You can set the sensitivity level:
high sensitivity and low sensitivity.
To enable the VOX function follow these steps:
1.Power ON parent unit.
2.Press OK button to enter in the main menu.
3.Press or
buttons to select SETUP option then press OK button.
4.Press or
buttons to select VOX ON/OFF parameter then press button to enable the
function (ON) or disable the function (OFF).
5.Press OK button to conrm the selection then press button to exit from main menu.
To set the VOX sensitivity level follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select SETUP option then press OK button.
4.Press or buttons to select VOX SENSE parameters then press button to select the
desired sensitivity level (HI or LOW).
5.Press OK button to conrm the selection then press button to exit from main menu.
If you set high sensitivity (HI) and the LCD panel in the parent unit never switch
OFF, it means that in the room there are noises. Before to set the nal value we
suggest to perform some test in order to select the correct value. Usually the
LOW level is correct to switch ON the LCD panel in the parent unit when there
are loud noise as crying baby or when he wakes up.
ALERT
Setup - TV Mode
This parameter allows you to set the TV mode if you connect the parent unit to an external
TV system by using the A/V OUT connector.
To set the TV mode follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select SETUP option then press OK button.
4.Press or buttons to select TV MODE parameter then press button to set PAL or NTSC.
5.Press OK button to conrm the selection then press button to exit from main menu.
In most european countries the main TV mode is PAL. In France is supported
too SECAM.
In most american countries the main TV mode is NTSC.
Setup – LCD Bright
This parameter allows you to set the LCD panel brightness level in the parent unit.
To set the LCD bright follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select SETUP option then press OK button.
4.Press or buttons to select LCD BRIGHT parameter then press or to set the level
desired (0 – 4).
5.Press OK button to conrm the selection then press button to exit from main menu.
Main Menu – TV OUT
The parent unit has an AV OUT connector to connect the appliance to an audio video device
as TV or VCR. In the packaging there is available the audio/video cable. To connect the parent
unit to an external TV system follow these steps:
1.Connect the cable to AV OUT connector available in the right side of parent unit.
2.Connect the 3 RCA connectors (yellow, red and white) to audio/video INPUT in the TV or
VCR:
•The yellow connector is the VIDEO signal.
•The red and white connectors are the stereo audio signal.
3.Power ON the parent unit.
4.Press OK to enter in the main menu.
5.Press or buttons to select TV OUT then press OK button. The LCD panel
in the parent unit will turn OFF and the images will be displayed on TV
screen.
To turn ON the LCD panel in the parent unit follow these steps:
1.Press OK button to enter in the main menu.
2.Press or buttons to select LCD OUTPUT option then press OK button.
The LCD panel in the parent unit will turn ON and you can disconnect the
audio/video cable.
To restore the LCD Panel view you can also turn OFF the parent unit and power
ON it again.
Baby Unit – description
This chapter provides a complete description of the Baby Unit functions.
1.Antenna
2.InfraRED LED for night vision
3.Lens
4.Microphone and speaker
5.DC Input and power LED
6.Power ON/OFF button
2
1
3
4
5
Base with batteries compartment
6
Baby Unit - Batteries
The Baby Unit supports two power systems:
•5VDC – 1.000 mA power adapter available in the packaging.
•3 x AAA standard batteries not included in the packaging.
NOTE
NOTE
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver SC-17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver SC-17 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info