459924
11
Zoom out
Zoom in
Previous page
1/12
Next page
2.
3.
USING THE RC-770
"USE"
lights when a function button is
pressed
to
indicate
that the corresponding control signal is being
sent.
1. Confirm that
all
indicators
are
lit.
(Operating
mode)
Use the LCD
select
buttons
((lllto
choose the desired LCD
pattern.
Press
the desired button, then recorded signal will be
transmitted.
o
ConÍirm
proper
operation after recording the signal.
o
lf the component does not respond to
the
recorded
signal from the RC-770. repeat the recording
process,
taking care that the distance between the remote
control units, their angle.
and their
respective
posi-
tions are within the suggested ranges.
Press
other
function buttons
as desired to activate the
corresponding
functions.
"ERROR"
lights if a button
with
no signal code is
pressed.
Receiver
"ERROR"
"ERROR"
may
appear
in the following
cases:
o
In
the use
mode
lf the
button
pressed
contains no
signal
code,
two or
more buttons
are
pressed
at the same
time,
or if buttons
are
operated
erroneously.
o
In
the learn
mode
When
a
programming
operatíon
was
not
successful,
"ERROR"
appears
for
5 seconds,
after which "USE"
and
"LEARN"
will flash.
"BATT.
LOW"
When Batteries
are Weak
lf
"BATT.
LOW"
appears,
the batteries
are weak
and should
be
replaced.
(All
four
batteries
should be
replaced
together.)
Note
lf
the batteries
in the RC-770
are removed
for replace-
ment, the
signal
codes will be
retained
for up
to one
hour. lf more
than
one hour
elapses
without
power,
the
programmed
signal
codes
will be lost.
4.
Pressing
any
button
will
automatically
turn on
the
power
to the
RC-770.
lf no
button
is
pressed
Íor
a
while,
power
will
be cut
automatically
to conserve
battery
life.
6.
lf
you press
more than
one
button
at a time,
"ERROR"
will
light.
Note
1. Some
operations
that
involve
pressing
two
buttons
at
the same
time
(VCR
recording,
etc.) or
opera-
tions
that
cause
a sequence
of signals
to be
transmitted
(auto
functions,
timed
operations,
etc.)
may involve
special
control
methods
and
as
a
result
may
not
work
properly
with the
RC-770.
2. When
using
the
RC-770
to control
components,
be
sure
that
all
the
indicators
are
lit
{the
unit is
in the
operating
mode).
21
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon RC-770 Universal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon RC-770 Universal in the language / languages: English as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info