614628
9
Zoom out
Zoom in
Previous page
1/26
Next page
5
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
q
PHONO 1, 2, 3, 4 /CD 1, 2, 3, 4 input terminals
These unbalanced stereo RCA terminals are
used to connect devices such as a turntable
(RIAA) with an MM (moving magnet) type of
cartridge or CD/Media Player.
w
DIGITAL IN 1, 2, 3, 4 input terminals
These are used to connect the digital output
terminals of CD/Media Players and digital players.
e
COAXIAL DIGITAL OUT terminal (44.1/ 48/
96kHz)
Output from this RCA terminal is the digital
output data. These signals are not affected by
the master level adjustments. We recommend
using an RCA cable designed for digital signals
(75 ohms). (This can be purchased from an
audio/video store.)
r
LINE 1, 2, 3, 4 FADER output terminals
Connect these terminals to the Fader input
terminals of the DN-S1200, DN-S3700 and etc
using the 3.5 mm stereo mini cord.
t
USB B terminal
This is connected to a computer to send and
receive the USB MIDI, HID and USB audio
signals.
The terminal supports USB 2.0 HighSpeed.
y
USB A terminal
Only one mass storage device such as a USB
memory or USB hard disk drive can be connected
to this terminal.
(* A USB hub is not supported.)
The terminal supports USB 2.0 HighSpeed.
u
MIDI output terminal
5-pin DIN connector output
This is connected to a MIDI-compatible device.
i
REC OUT terminals
These are the recording output terminals.
o
MASTER OUT (UNBALANCED) terminals
This stereo pair of RCA terminals provides a
unbalanced line level output.
Connect these terminals to the unbalanced
analog input terminals on an amplifi er or
console.
Q0
MASTER OUT (BALANCED) connectors
These XLR type connectors provide a balanced
line level output.
Connect these connectors to the balanced
analog input connectors on an amplifi er or
console.
Pin layout: 1. GND, 2. Hot, 3. Cold
Applicable connector: Cannon XLR-3-32 or
equivalent.
Q1
BOOTH OUT (BALANCED) connectors
These TRS terminals are balanced line output
terminals whose signal levels are adjusted using
the BOOTH LEVEL control provided on the top
panel.
Pin layout (TRS):
Tip: Hot, Ring: Cold, Sleeve: GND
Q2
SEND/
Q3
RETURN terminals
These 1/4” TS mono terminals allow external
processing of the program signal.
When connect monaural type effect processor,
use Lch input and output.
SEND (output):
Connect this to the input terminal on the external
effector.
RETURN (input):
Connect this to the output terminal on the
external effector.
Q4
MIC1 input terminal
A microphone is connected to this balanced
combo jack with XLR connector or with 1/4-inch
TRS plug.
Pin layout: 1. GND, 2. Hot, 3. Cold
Applicable connector: Cannon XLR-3-32 or
equivalent.
Q5
MIC2 input terminal
Accepts a balanced microphone with 1/4”
terminals.
Pin layout (TRS):
Tip: Hot, Ring: Cold, Sleeve: GND
Q6
POWER switch
This turns the unit’s power ON (h) or OFF (j).
Rear Panel
PUSHPUSH
ty u i o Q0 Q1 Q2 Q5
qQ3 Q4Q6 rwe
Getting Started
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1700 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X1700

Denon DN-X1700 User Manual - German - 26 pages

Denon DN-X1700 User Manual - Dutch - 26 pages

Denon DN-X1700 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info