614628
8
Zoom out
Zoom in
Previous page
1/26
Next page
4
Getting Started Connections Basic Operations Specifi cations TroubleshootingEffector Function Fader Start UtilityUSB
Q5
Effect ON/OFF button
This sets the effects of EFX 1 or EFX 2 to ON
or OFF.
Q6
CROSSFADER
Controls the relative output level from the
summed A and B Mixes. When the fader is
at its far left, only the A Mix is heard from the
Outputs. As the fader is moved toward the
right, the amount of B Mix is increased and the
amount of A Mix is decreased. When the fader
is centered, equal amounts of A and B Mixes are
routed to the Outputs. Fully right is all B Mix at
the Outputs.
Q7
Channel input fader (CH FADER)
Controls the level of the selected Input.
Q8
HEADPHONE output jack
Accepts 1/4” stereo headphone plugs.
Q9
HEADPHONE level control
Adjusts the volume for the headphones.
W0
HEADPHONE PAN control
This is used to adjust the balance between the
CUE sound and the master sound which are
monitored using the headphones.
W1
SPLIT CUE button
There are two headphone monitor modes.
Stereo mode (SPLIT CUE OFF):
The cue signals and master signals can be
monitored in stereo.
SPLIT CUE mode:
The monaural cue signals are heard through the
left channel of the headphones, and the monaural
master signals through the right channel.
W2
CROSSFADER CONTOUR control
Allows adjusting the “shape” of the Crossfader
response from a gentle curve for smooth, long
running fades, to the steep pitch required for top
performance cut and scratch effects.
W3
CH FADER CONTOUR control
Adjusts the volume curve response of the
channel fader.
W4
CH FADER START switch
This function will start the performance of CD/
Media Player with Ch. Fader automatically is
ON/OFF.
W5
CROSSFADER START switches
Use this to switch the Crossfader Start function
ON and OFF.
W6 MIC SEND LEVEL control
This is used to adjust the level at which the mic
signals are sent to the master output.
W7
Mic EFX INS 1, 2 buttons
These buttons enable the various effects of
the selected side, either EFX 1 or EFX 2, to be
obtained for the mic input signals.
W8
MIC EQ controls
Contour the frequency response of the Mic
input –15 dB to +15 dB.
W9
DUCKING ON/OFF button
• Use this to switch the Talk Over function ON and
OFF. (ON/OFF is cyclic)
When the button is lit, level of signals except
Mics is attenuated.
* The ducking attenuation level can be adjusted
in the “UTILITY” mode.
E0
MIC1, MIC2 TRIM controls
Adjusts the level of the Main Mic input.
E1
MIC1, 2 buttons
When the button’s LED is lighted, the mic
signals take effect.
E2
CD/PHONO line input selector buttons
These enable the line input of each channel to
be selected as CD or PHONO.
CD:
Rear panel LINE1–4 CD terminal input
PHONO:
Rear panel LINE1–4 PHONO terminal input
E3
SOURCE SEL LN1/LN2/LN3/LN4/D1–4/USB
controls (channel input selector)
These enable any of six inputs to be selected
for each of the channels. The same input
can be selected for more than one channel.
When DIGITAL is selected, the LED of the
corresponding button lights up red; when USB
is selected, it lights up blue.
LINE1
SOURCE SEL
CH1 CH4
SOURCE SEL
LINE2
LINE3
LINE4
DIGITAL
USB
E4
MIDI layer selector buttons
When these buttons are set to ON, the controls
of the selected channels function as MIDI
controllers. Also, the EQ control rings light up
blue.
E5
Channel input LEVEL controls
These are used to adjust the levels of the
selected inputs.
E6
Channel isolator EQ controls (HI, MID, LOW)
These are used to change the frequency
response of the selected inputs.
At the center position, the frequency response
is fl at.
At the –∞ position, the frequencies of all the
bands are cut off completely.
E7
CH LEVEL meter
Displays the input level after adjusted with
LEVEL E5 and Source EQ E6 controls.
E8
Channel EFX SEND 1, 2 buttons
These buttons enable the various effects of
the selected side, either EFX 1 or EFX 2, to
be obtained for the channel audio signals. The
same effect (EFX 1 or 2) can be selected for a
multiple number of channels.
The LED of the EFX button for the side selected
for each channel lights.
E9
Channel CUE buttons
Pressing in any or all of CUE buttons routes the
respective source to the headphone and meter
cue sections. Pressing multiple buttons makes
it possible to derive mixed sound from the
selected sources.
* The SOLO mode with no signals mixed can
also be selected as a preset.
R0
CROSSFADER ASSIGN switches
A, B:
The channel source is assigned to A or B of the
Crossfader.
THRU:
Select when you don’t assign the channel source
into the Crossfader.
R1
MASTER BALANCE control
Adjusts the L/R balance of the MASTER output.
R2
L/CUE, R/PGM master level meter
One of two modes can be selected for display
on this meter.
Split CUE OFF:
The master output audio level is displayed.
Split CUE ON:
The right channel master CUE (monaural) and
left channel CUE (monaural) audio levels are
displayed.
R3
SIG/PK
This is the signal/peak meter for the mic input
level.
Off:
No signals input (under –60 dB/FS)
Green:
Signal input (–60 dB/FS to under –20 dB/FS)
Orange:
Suitable signal input level (–20 dB/FS to under
–6 dB/FS)
Red:
Excessively high signal input level (above –6 dB/
FS)
Getting Started
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1700 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X1700

Denon DN-X1700 User Manual - German - 26 pages

Denon DN-X1700 User Manual - Dutch - 26 pages

Denon DN-X1700 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info