Manual Denon DN-X120 (page 7 of 13) (English)

614630

Zoom out

Zoom in

1/13



Connections Playback Speciﬁcations

ENGLISH

Rear Panel

W2W3W4W1

W4W5

Q7 Power operation switch (POWER)

Selects power “ON” or “OFF”.

NOTE:

Whenever the power switch is in the OFF state,

the AC adaptor is still connected on AC line

voltage. Please be sure to unplug the cord when

you don’t use for along time.

Q8 Balanced MASTER OUT jacks (BAL.)

• These 1/4” TRS jacks provide a balanced line

level output.

• Connect these jacks to the balanced analog

input jacks on an ampliﬁer or console.

• Pin layout: Tip=Hot Ring=Cold Sleeve=GN

Q9 MIC BALANCED INPUT jack

• Accepts an balanced microphone with 1/4” TRS

mono jacks.

• Pin layout: Tip=Hot Ring=Cold Sleeve=GND

W0 PGM1, 2 FADER output jacks

Connect these jacks to the FADER input jacks of

DN-S3500, DN-S1200 and etc. using the 3.5mm

stereo mini cord.

W1 Phono ground screw (GND)

• This screws provide a place to connect the

ground wire from a turntable.

• This terminal is exclusively for a turntable ground

and not a safety earth ground.

W2 PHONO1, 2 / LINE1, 3 switches (LN / PH)

• These switches change the input from PHONO

to a LINE level input.

• These switches set a LINE level input when

turntable is not connected.

NOTE:

Always be sure main power is shut off before

change the position of the Line Level Selector

Switch.

W3 PHONO1, 2 / LINE1, 3 input jacks

These stereo pair of unbalanced RCA jacks are

inputs for a PHONO (RIAA) stage for magnetic

(MM) cartridges or a LINE stage suitable for any

device, such as a CD player.

W4 LINE2, 4 input jacks

These stereo pair of unbalanced RCA jacks are

inputs for any line level device.

W5 Unbalanced MASTER OUT jacks

• This stereo pair of RCA jacks provides an

unbalanced line level output.

• Connect these jacks to the unbalanced analog

input jacks on an ampliﬁer or console.

W6 AC IN

Input connection for the included AC adaptor.

NOTE:

Use speciﬁed attached AC adaptor only.

Front panel

E1E0

W7 CH 1/2 FADER START switches

Use this to switch the Channel Fader Start

function ON and OFF.

W8 CROSSFADER START A, B switches

Use this to switch the Crossader Start function

ON and OFF.

W9 CROSSFADER REVERSE switch

Reverses the direction of the crossfader.

E0 CROSSFADER CONTOUR adjustment

Adjusts the shape of the crossfader curve from

a fast cut for scratching or to a slow fade for

mixing.

E1 HEADPHONE output jack

Accept 1/4” stereo headphone plugs.

Getting Started

1.DN-X120_ENG.indd 7 2007/12/28 18:07:06

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X120 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Denon DN-X120 Manual

Product: