Manual DeLonghi Dinamica ECAM 350.75.S (page 23 of 27) (English)

687412

Zoom out

Zoom in

1/27

Add pre-ground coee The "pre-ground coee" function has been se-

lected without placing any pre-ground coee

in the funnel (A4).

Place pre-ground coee in the funnel (g. 11)

or deselect the "pre-ground" function.

A LONG coee with pre-ground coee has

been requested

Put one level measure of pre-ground cof-

fee into the pre-ground coee funnel (A4)

and press OK (B3) to continue and complete

preparation.

Fill beans container The coee beans have run out. Fill the beans container (A3) (g. 8).

The pre-ground coee funnel (A4) is clogged. Empty the funnel with the help of the brush

(C5) as described in section “14.8 Cleaning the

pre-ground coee funnel”.

Ground too ne

Adjust mill

The grinding is too ne and the coee is deliv-

ered too slowly or not at all.

Repeat coee delivery and turn the grinding

adjustment dial (A5) (g. 7) one click clockwise

towards 7 while the coee mill is in operation.

If after making at least 2 coees delivery is

still too slow, repeat the correction procedure,

turning the grinding adjustment dial another

click until delivery is correct (see section “10.1

Adjusting the coee mill”. If the problem per-

sists, make sure the water tank (A17) is fully

inserted.

If the water softener lter (C4) is present, an

air bubble may have been released inside the

circuit, obstructing delivery.

Insert the hot water spout (C6) in the appli-

ance and deliver a little water until the ow

becomes regular.

Less coee Too much coee has been used. Select a lighter taste by pressing (B7) or

reduce the quantity of pre-ground coee.

Insert water spout The hot water spout (C6) is not inserted or is

inserted incorrectly.

Fully insert the hot water spout (g. 4).

Insert milk container The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (g.

16).

Insert infuser assembly The infuser (A20) has not been replaced after

cleaning.

Insert the infuser as described in section “14.9

Cleaning the infuser”.

Water circuit empty

Fill water circuit

Hot water

Conrm?

The water circuit is empty. Press OK (B3) to deliver water from the spout

(C6) until it ows out normally. If the problem

persists, make sure the water tank (A17) is fully

inserted.

Press OK to CLEAN The milk container (D) has been inserted with

the froth adjustment dial (D1) in the "CLEAN"

position.

To proceed with the CLEAN function press OK

or turn the froth adjustment dial to another

position.

Set dial to CLEAN

ESC to cancel

Milk has been delivered recently and the tubes

inside the milk container (D) must be cleaned.

Turn the froth adjustment dial (D1) to CLEAN

(g. 19).

Turn froth adjustment dial The milk container (D) has been inserted with

the froth adjustment dial (D1) in the "CLEAN"

position.

Turn the froth adjustment dial to one of the

milk froth positions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.75.S in the language / languages: English as an attachment in your email.

The manual is 8.24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.75.S

DeLonghi Dinamica ECAM 350.75.S User Manual - German - 28 pages

DeLonghi Dinamica ECAM 350.75.S User Manual - Dutch - 21 pages

DeLonghi Dinamica ECAM 350.75.S User Manual - French, Italian - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Dinamica ECAM 350.75.S Manual

Product: