687412

DeLonghi Dinamica ECAM 350.75.S Manual

25
Zoom out
Zoom in
Previous page
1/27
Next page
24
21. TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM POSSIBLE CAUSE REMEDY
The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot
water (Please note: you can use the hot water
function).
The internal circuits of the appliance have
cooled down because 2/3 minutes have
elapsed since the last coee was made.
Before making coee, rinse the internal circuits
by pressing the button (B5).
A low coee temperature is set. Set a higher coee temperature in the menu.
The coee is weak or not
creamy enough.
The coee is ground too coarsely. Turn the grinding adjustment dial (A5) one
click anticlockwise towards 1 while the coee
mill is in operation (g. 7). Continue one click
at a time until coee delivery is satisfactory.
The eect is only visible after delivering 2
coees (see section “10.1 Adjusting the coee
mill”).
The coee is unsuitable. Use coee beans for espresso machines.
The coee is delivered too
slowly or a drop at a time.
The coee is ground too nely. Turn the grinding adjustment dial (A5) one
click clockwise towards 7 while the coee mill
is in operation (g. 7). Continue one click at a
time until coee delivery is satisfactory. The
eect is only visible after delivering 2 coees
(see section “10.1 Adjusting the coee mill”).
The appliance will not make
coee
The appliance has detected impurities in its
internal circuits. "Please wait" is displayed.
Wait for the appliance to be ready for use again
and reselect the required beverage. Contact
Customer Services if the problem persists.
Coee does not come out of
one or both of the spouts.
The coee spouts (A9) are blocked. Clean the spouts with a toothpick (g. 24B).
The appliance does not come
on
It is not plugged into the mains socket. Plug into the mains socket (g. 1).
The main switch (A22) is not turned on. Place the main switch in the I position (g. 2).
The power cord (C7) connector is not inserted
correctly.
Insert the connector as far as it will go in the
socket at the back of the appliance (g. 1).
The infuser cannot be
extracted
The appliance has not been turned o correctly Turn the appliance o by pressing the
button (A7) g. 6) (see section “7. Turning the
appliance o”).
… 25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica ECAM 350.75.S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.75.S in the language / languages: English as an attachment in your email.

The manual is 8.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.75.S

DeLonghi Dinamica ECAM 350.75.S User Manual - German - 28 pages

DeLonghi Dinamica ECAM 350.75.S User Manual - Dutch - 21 pages

DeLonghi Dinamica ECAM 350.75.S User Manual - French, Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info