618002
5
Zoom out
Zoom in
Previous page
1/9
Next page
The system support deleting previous recorded
MP3 or existing files.
1 In USB or SD card playback mode, press and
hold REC/ERASE /
for 2 seconds, current
playback track is stopped and will be deleted.
2 Message  delete  is displayed
Delete MP3 tracks
From CD TO USB/SD
The system is capable to convert whole CD disc to
MP3 format and copy to USB mass storage device
or SD card. And also have the ability to copy one
single MP3 track to and from on USB/SD card.
1 In CD playback mode, press REC / to start
ripping to USB/SD card (default USB if both
device are detected), playback will be stopped
and skipped back to the beginning of current
track, system will scan the contents of USB/SD
card and create folder to store MP3 track.
Resume CD playback and start ripping from the
moment. The corresponding target device icon
 USB  /  CARD  start flashing.
2 Press STOP/BAND /
to exit CD ripping.
From AUX To USB/SD
1
10
Getting Started
Unpacking Power Source
USB/SD Operation
1 Remove packing materials from unit.
Note: Save all packing materials
2 AC Adaptor and Remote Control are located on
the outside of the Styrofoam packaging.
3 Remove plastic bag covering radio and remote
control.
4 Untie antenna wire on back of radio.
5 Open lid and remove Styrofoam shipping
material from turntable.
6 Remove black tie-wrap from under the TONE
ARM
7 Remove white protective needle cover by gently
pulling towards the front of the unit.
SET UP
1 Plug the small end of the AC adaptor into the
DC jack on the back of unit and plug the adaptor
into an appropriate outlet.
2 Untie the FM antenna and allow it to hang
down in a straight line for optimum FM
reception. If you have trouble tuning in an
FM station, move the external FM antenna for
best reception. Do not connect FM antenna to
outside antenna.
Connect the AC Adaptor to the wall socket. This
system switches to Standby mode automatically
and LCD would shown as below
To switch the unit on, press POWER /
LCD
backlight will be turned on.
STANDBY LED is turned off and displayed as below.
The system is capable to convert audio signal from
AUX input to MP3 format and store in USB mass
storage device or SD card (default USB if both
devices are detected).
1 Press FUNCTION / once or more to select
AUX
2 Press REC / to start ripping, the system will
scan the contents of USB / SD card and create
folder to store MP3 track.
3 Icon REC and message  RIPP TO  are
displayed, icon  AUX  start flashing.
2 Press REC / to start ripping, the system will
scan the contents of USB/SD card and create
folder to store MP3 tracks.
3 Icon  REC  and message  RIPP TO are
displayed, icon  PHONO  start flashing.
4 The target device icon  USB  or  CARD 
start flashing as ripping begins.
5 Press STOP/BAND / to exit PHONO ripping
4 The target device icon  USB  or  CARD 
start flashing as ripping begins.
5 Press STOP/BAND /
to exit AUX ripping
Note: The message  NO FUNCT  will be displayed
if any key pressed during AUX ripping process.
The message  NO DEV  will be shown if neither
USB or SD card not detected. The message
FULL  will be displayed if not enough memory in
target device.
1 In CD-MP3, USB or SD card playback mode,
press REC / to start MP3 copying from CD
to USB/SD card, or USB to SD card or vice
versa. Playback will be stopped and system will
scan the contents of USB/SD card and create
folder to store MP3 track.
2 icon  REC displayed
3 Message COPY 01 will be displayed, the
proportional copied percentage will be shown
on the decimal number.
4 The target device icon USB or CARD start
flashing, the decimal number will be increment
from 01 as MP3 copying starts, the process will
stop as it reach 100
5 Current MP3 will be playback from beginning
MP3 Copying
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crosley CR7002A Troubadour at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crosley CR7002A Troubadour in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info