652347
50
Zoom out
Zoom in
Previous page
1/56
Next page
50
E8A
Current Flow
even there is no
Capacity Demand
Check Contactor
8x
------
Main contactor jammed
Rotary switch in position TEST
E9A
Check Correct
Setting of Steam
Cylinder Type on
Electronic Board
9x
CP2 Chip Missing
Insert CP2 Chip
For Help Contact
Condair Supplier
10x
CP2-Chip missing
Humidity sensor defective
Humidity Sensor
Disturbed
Check Sensor and
Connections
11x
Humidity too high/too low for more
then 30 minutes
Humidity Warning
Too Low/Too High
Check the Air
Condition Plant
12x
Humidity Warning
Too Low/Too High
12x
E10
E11
Humidity too high/too low for more then 2 hours
------
------
------
Electrode current to low
(less then 30 minutes)
Electrode current to low (more then 2 hours)
E5A
No Electrode
Current [A]
Phase Interrupt
Outlet-V Leaking
No Electrode
Current [A]
5x 5x
Electrode current to high Electrode current to high
E6A
Excess Current
Of Electrode [A]
Outelet Clogged/
Cyl. Maintenance
Excess Current
Of Electrode [A]
6x 6x
Indication on master unit Indication on slave unit
7x
7x
or blinks permanently
with drain/info key re-
leased
--- ---
BUS Line/Traffic
interrupted
Indication/Malfunction
“Warning” “Error”
yellow LED blinks on module M4 red LED blinks on module M/M3 on module M4
---
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair CP2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair CP2 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info