Categories
300954

Cisco wip 310 Manual

192
Zoom out
Zoom in
Previous page
1/325
Next page
Configuring Regional Parameters and Supplementary Services
Localizing Your IP Phone
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 191
7
The
weekday
value equals any value in the range -7 to 7 (Monday to Sunday). If the
weekday value is 0, the date to start or end daylight saving is exactly the month
and day. If the weekday value is -7 to 7, daylight saving starts or ends on the
weekday value on or after the month and day. If the weekday value is not 0 and the
day value is negative, then daylight saving starts or ends on the weekday value on
or before the month and day.
Optional time values:
HH
represents hours (0-23),
mm
represents minutes (0-59).
and
ss
represents seconds (0-59). Optional values inside brackets [ ] are assumed
to be 0 if not specified. Midnight is represented by 0:0:0.
The
save-time
value is the number of hours, minutes, and/or seconds to add to the
current time during DST. The
save-time
value cannot be a minus (-) in version 7.5.1
and higher. Earlier firmware versions support a negative value.
Daylight Saving Time Examples
The following example configures daylight saving time for the U.S, adding one hour
starting at midnight on the first Sunday in April and ending at midnight on the last
Sunday of October; add 1 hour (USA, North America):
start=4/1/7/0:0:0;end=10/31/7/0:0:0;save=1
start=4/1/7;end=10/-1/7;save=1
start=4/1/7/0;end=10/-1/7/0;save=1
The following example configures daylight saving time for Egypt, starting at
midnight on the last Sunday in April and ending at midnight on the last Sunday of
September:
start=4/-1/7;end=9/-1/7;save=1 (Egypt)
The following example configures daylight saving time for New Zealand (in version
7.5.1 and higher), starting at midnight on the first Sunday of October and ending at
midnight on the third Sunday of March.
start=10/1/7;end=3/22/7;save=1 (New Zealand)
The following example reflects the new change starting March 2007. DST starts on
the second Sunday in March and ends on the first Sunday in November:
start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1
Downloaded from www.Manualslib.com manuals search engine
… 192 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco wip 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco wip 310 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info