Categories
300954

Cisco wip 310 Manual

191
Zoom out
Zoom in
Previous page
1/325
Next page
Configuring Regional Parameters and Supplementary Services
Localizing Your IP Phone
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 190
7
• Manual Setup—The time and date can be entered manually by using the IP
phone screen or the phone web user interface. However, this value is
overwritten by the NTP time or SIP Message Date whenever they are
available to the phone. Manual setup requires that you enter the time in
24-hour format only.
The time served by the NTP Server and the SIP Date Header are expressed in
GMT time. The local time is obtained by offsetting the GMT according to the time
zone of the region.
The
Time Zone
parameter can be configured by using the phone web user
interface or through provisioning. This time can be further offset by the
Time
Offset (HH/mm
) parameter. This parameter must be entered in 24-hour format and
can also be configured from the IP phone screen.
The
Time Zone
and
Time Offset (HH/mm)
offset values are
not
applied to manual
time and date setup.
Configuring Daylight Saving Time
The phone supports auto adjustment for daylight saving time. You must set
Daylight Savings Time Enable
to yes and enter the DST rule. This option affects the
time stamp on the
CallerID
.
To enter the rule for calculating DST, include the start, end, and save values
separated by semi-colons (;) as follows:
Start = start-time; end=end-time; save = save-time
For example, the default DST rule is:
start=4/1/7;end=10/-1/7;save=1.
The
start-time
and
end-time
values specify the start and end dates and times of
daylight saving time. The format is:
month/day/weekday[/HH:mm:ss]
The
month
value equals any value in the range 1-12 (January-December).
The
day
value equals any + or - value in the range 1-31. If value is -1, the time will
change on the weekday on or before the end of the month; the last occurrence of a
weekday in that month.
Downloaded from www.Manualslib.com manuals search engine
… 191 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco wip 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco wip 310 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info