791749
3
Zoom out
Zoom in
Previous page
1/15
Next page
y Weather Forecast – your weather station has a display of weather forecast but it does not have a
barometer and thus is just an indication for reference only and may not be accurate but just a
visual display. The company accepts no liability for any incorrect forecast. The icons are
Sunny/Partly Cloudy/Cloudy/Rainy.
y Alarm Setting – Press and hold the “ALARM” button to enter the setting mode. Enter the desired
hour and minute values by pressing the up and down arrow buttons and pressing “ALARM” to set
each. Press “ALARM” to show the alarm time and the “AL.” icon will be displayed briefly and
then press the “ALARM” again to have a bell appear (in the clock display area) meaning that the
alarm is enabled. To turn the alarm off (disable) press “ALARM” again and the bell icon will
disappear.
y Snooze – when the alarm goes off, press “SNZ” button to go into snooze mode and the alarm will
go off again after 5 minutes (can be repeated three times). To stop the snooze, press the
“ALARM” button.
y Channel – if your Sensor is set correctly to Channel 1, then a small icon
to the left of outdoor temperature display will show a “1” in a box. If you
do not have an outdoor temperature and humidity display, make sure that
the “1” is displayed and if not (shows a 2 or 3), then push the “CH”
button until is shows the “1”.
y Placement – the Receiver can be put on a table, desk, or other flat surface
or it can (by using a hanger cut out on the rear of the Receiver) be hung
on a wall or other location.
Specifications:
y Indoor Temperature Range = 0º to +50º C (+ 32º to + 122º F)
y Remote Sensor Temperature Range = -20º to + 70º C (-4º to + 158º F)
y Indoor/Outdoor Humidity Range = 20% to 95% Relative Humidity
y Resolution = ± .5º C ( ± 1.5º F) for temperature & ± 1.5% humidity
y Clock = digital quartz
y Transmission = RF433 MHz
y Dimensions = Receiver – 3.1” x 1.8” x 5.6” (79mmx46mmx142mm)
Sensor - 2.4” x 1.1” x 3.8” (61mmx28mmx97mm)
y Weight = Receiver - 5oz/142g Sensor - 3oz/85g
2835 Columbia St.
Torrance, California 90503 U.S.A.
www.celestron.com
Printed in China 0110 RoHS
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron 47001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info