791749

Celestron 47001 Manual

1
Zoom out
Zoom in
Previous page
1/15
Next page
Personal Weather Station
with Wireless Remote Sensor
Model # 47001
Thank you for purchasing this Celestron
personal weather station. Please read the
instructions prior to using it and we hope you
will have many years of pleasure using it.
Set Up Power for the Receiver
Open the battery compartment door on the rear of the Receiver. Then insert
two AAA batteries (user supplied) with polarity as indicated in the battery
compartment. After installation, put the battery compartment door back on.
A low battery icon is displayed next to the outdoor humidity reading when
the batteries are low on power.
For optimum performance, please place the Receiver away from metal and
other sources of interference such as mobile phones, TVs, computers,
appliances, etc. If the Receiver stops showing the display or dims, replace
the batteries.
Set Up the Power & Make Settings for the Wireless Remote Sensor
Remove the small screw (center area of center image) from the rear door of the sensor with a small
screwdriver. Remove the cover (since it is sealed tight against the elements you may have to pry it
slightly with a screwdriver to get it off). Insert two AAA batteries (user supplied) as indicated in the
sensor (see right image). Set the switch to “1” (for Channel 1), push/toggle the button so readings will
be shown in “C” (Centigrade) or “F” (Fahrenheit). Then push the button “TEST” and hold it a couple
of seconds and it will transmit the RF signal from the sensor to the Receiver. The Sensor itself will
display the outside temperature and humidity (see left image). Replace the rear door of the sensor by
installing the small screw to hold it in place.
The Sensor can be mounted up to 100 feet (30 meters) in an open area from the Receiver to
communicate with it. The Sensor has a place on the rear of the unit to mount/hang it securely (hanger
part on left of center image) to any surface that is secure or it can stand up (if in an area without wind,
etc.) by folding out the small stand (right part of center image).
ENGLISH
1 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron 47001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info