791749

Celestron 47001 Manual

2
Zoom out
Zoom in
Previous page
1/15
Next page
2
If the battery power becomes low on the Sensor, a low battery icon will appear on the LCD display
and if so change batteries to ensure a strong signal is being sent to the Receiver in order that the
Sensor will send accurate information to the Receiver.
Settings and Operation of the Receiver
y Indoor & Outdoor Temperature & Humidity – the indoor
temperature and humidity is shown on the 2nd section of the LCD
display and the outdoor temperature and humidity is shown on the
3rd section of the display. The humidity trend (indoor and outdoor)
will be displayed in a small box to the right of the temperature
display. You will see an icon of indoor humidity of various faces –
happy, sad, or in between depending on the readings of very dry to
very wet.
y Data displayed in “C” or “F” – push the “DOWN” button (when
in a normal mode) to change from “C” (Centigrade) or “F”
(Fahrenheit) for the display you desire.
y Clock & Calendar – Press the “TIME” button and hold down for a
couple of seconds to enter the setup mode. Use the “UP” or
“DOWN” buttons to make changes. Press the “TIME” after each
setting is correct. The settings in sequence will be:
year/month/date/weekday language/hour/minute/time difference/exit. The weekday language to
choose is available in German, English, Italian, French, Dutch, Spanish, and Danish. The clock
format can be 12 or 24 hour mode – use the “UP” button (in normal mode) to change the format that
you wish to use.
y Moon Phase – will automatically be seen near the
center of the last display and will be correct if the
calendar is set accurately.
y Max/Min Memory – in normal mode, press the button
“MAX/MIN” to see the minimum temperature and
humidity both indoors and out, press the button again
to see the maximum temperature and humidity both
indoors and out, press the button again to return to the
normal mode. Hold down the button for three seconds to erase the memory.
y Temperature Alert – you can set a range of outdoor temperature alerts (high and low). In normal
mode press the “ALERT” button once and it will display an icon that the alert is enabled (to the
right of the outdoor temperature) and press again and the icon will be removed to indicate the alert
is disabled. To set the maximum and minimum temperatures for the alert, hold the “ALERT”
button down for a few seconds and a icon (top part) will flash to tell you to set the maximum
temperature alert – use the “UP” and “DOWN” buttons to choose your alert temperature and push
the “ALERT” button to set and then push the button again the lower icon will flash and you will
set the minimum temperature alert. When the temperature outdoors reaches the alarm stage, the
icons will flash and make a sound and last 5 seconds and then repeat every minute until you press
any button to stop the alarm.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Celestron 47001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Celestron 47001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info