469907
4
Zoom out
Zoom in
Previous page
1/7
Next page
10
Important Information
Carrera DIGITAL 124EXCLUSIV
Carrera DIGITAL 124
EXCLUSIV
Please note that Exclusiv (analog system) and Carrera DIGITAL
124/132 (digital system) involve two separate and completely inde-
pendent systems. We hereby expressly indicate that both systems
must be kept separate when setting up the track, i.e. no connecting
rail from Exclusiv may be used together with the connecting rail and
Black Box of the Carrera DIGITAL 124/132, even if only one of the
two connecting rails (Exclusiv connecting rail or Carrera DIGITAL
124/132 connecting rail and Black Box) is attached to the current
supply. Furthermore, no other Carrera DIGITAL 124/132 compo-
nents (switches, electronic lap counter, pit stop) may be built into an
Exclusiv course, i.e. via analog operation.
Non-compliance with the above information may result in damage or
destruction of the respective Carrera DIGITAL 124/132 components.
In this case no warranty may be claimed.
Positioning
receiver/tower
3 m
9.84 ft.
Receiving radius 3 m/9.84 ft.
1
3 m
9.84 ft.
3 m
9.84 ft.
2 m
6.56 ft.
2 m
6.56 ft.
1 m
3.28 ft.
2
The tower contains the infrared-receiver which passes on the sig-
nals of the infrared-transmitter (located in the WIRELESS speed
controller) to the Carrera DIGITAL 124/132 car. In order to be able to
receive the signals permanently the WIRELESS transmitter (speed
controller) should be kept at a maximum range of 3 metres from the
receiver/tower in visibility (cf. Fig.
1
and
2
). To achieve a larger
receiving radius a further receiver/tower can be connected to the
Black Box (cf. Fig.
2
).
Assembly instructions
1 4
2 3
1
+
2
+
3
Before assembling please insert the connecting clips
in the track as shown in fi gure
1
. Stick tracks together on a fl at
base. Move the connecting clips according to fi gure
2
in direction
of the arrow until they audibly snap in. The connecting clip may also
be inserted later. The connecting clips can be removed into both
directions by simply pressing down the clamped nose (see fi g.
3
).
4
Fastening: To fasten the track sections on a board, it is neces-
sary to use the track section fasteners (Item no. 85209, not con-
tained in the package).
Note:
Carpeting is not a suitable foundation on which to build the track be-
cause of static charging, formation of fl uff and ready infl ammability.
Guard Rails and Supports
1 2
3 4
1
Guard rails: Guard rail mounts are fi tted by tilting them upwards
onto the verge of the track.
2
+
3
Supporting raised sections: The shank of the ball pivot is
to be inserted into the square slots provided on the underside of the
track. The supports can be made higher by using the extensions.
The pedestal of the supports can be screwed to a base if required
(screws not included).
4
Supporting steep curves:
Slanting supports of the right height are provided to support steep
curves. Fix the nonadjustable supports at the beginning and end of
the curves. Insert the heads of the supports in the round slots of the
underside of the track.
Electrical connection
1
1
Connect the transformer plug with the Black Box
Note: To avoid short-circuits and electrocution, the toy may not be
connected using foreign devices, plugs, cables or other objects for-
eign to this toy. The Carrera DIGITAL 124 car racetrack only works
properly with an original Carrera DIGITAL 124 transformer.
The PC interface (PC Unit) may only be operated together with the
original Carrera PC Unit.
Car components
1
3
4
5
9
13
12
7
14
8
10
11
15
16
2
3
3
3
6
1
Body (incl. spoiler)
2
Engine block
3
Tyres
4
Rear axle
5
Front axle
6
Front axle attachment
7
Magnet base
8
Rear axle attachment
9
Chassis
10
Rear light
11
Front light
12
Board
13
Rocker bar including guide keel opening
14
Guide keel with double sliding contact
15
Central magnet unit incl. distance plate
16
Additional magnet unit incl. distance plate
Note: vehicle construction depends on the model.
The designation of the individual parts may not be used as
order numbers.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrera Digital 124 - 23605 SPORTSCAR DUEL en WIRELESS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrera Digital 124 - 23605 SPORTSCAR DUEL en WIRELESS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info