19828
4
Zoom out
Zoom in
Previous page
1/4
Next page
Install Software
You can install printer and scanner drivers and the various utility
items.
On-Line Registration
You will be pointed to a directory on the Brother Product Registration Web
page.
On-Line Documentation
View the Owners Manual and other documentation.
Brother Support
Get all contact you need if you have to get in touch with our
Customer Service, or Brother Authorized Service Center.
Help
Helpful hints.
You can get a variety of
information from this
CD-ROM
(For Windows
®
)
MFL Pro Driver Installer
You can install the printer and scanner drivers and the various
utility items.
PaperPort 5.5 Installer
You can install a document management application used to view
scanned documents.
ReadMe!
You can get important information and troubleshooting tips.
Documents
View the Owners Manual and other documentations.
You can get a variety of
information from this
CD-ROM
(For Macintosh
®
)
Windows Macintosh
What is included on the CD-ROM
For Windows NT
®
Workstation Version 4.0 Users
Step 1.
Check that your computer is
turned ON.
You must be logged on as the Administrator.
Step 2.
Connect the DCP to your PC
with the Parallel Cable.
A. Connect the Filter Core and Cable Tie to the parallel interface cable.
B. Connect the parallel interface cable to the parallel interface port of the DCP and
secure the wire clips.
C. Connect the interface cable to the printer port of the computer and secure it with
the two screws. For the location of your computers parallel printer port, see the
Users Guide for your computer.
10.
Select Yes to restart your computer, and
then click Finish.
The Brother Printer and Scanner drivers have been
installed and the installation is now complete.
11. Click Yes to have the Control Center
loaded each time Windows is started.
The Control Center will appear as an
icon in the task bar. If you click No, the
Scan key on the DCP will be disabled.*3
For Apple
®
Macintosh
®
QuickDraw
®
Driver for OS 8.6/9.0/9.0.4/9.1 Users
Step 1.
Make sure your DCP power switch
is turned OFF and your Macintosh
is turned ON.
Make sure you do NOT connect your DCP to your Macintosh
Step 2.
Insert the CD-ROM into your
CD-ROM drive.
Installing MFL Pro Driver
Step 3.
Restart your Macintosh so it can
recognize the new driver.
Step 4.
Connect the Filter Core and
Cable Tie to the USB cable.
1. When the window appears, double-click
MFL-PRO Suite Driver Installer to
install the printer and scanner drivers.
After the installation is completed, the
screen prompts you to restart your
Macintosh.
1.
Double-click the PaperPort
®
5.5 Installer. *1
2. Follow the instructions on the screen.
The Brother Printer and Scanner drivers have been
installed and the installation is now complete.
Step 5.
Connect the MFC to your Macintosh
with the USB cable, and then turn
the DCP
power switch
ON.
Step 6.
Select the Printer.
Step 7.
Install Paper Port.
1.
From the Apple menu, open the Chooser.
2. Click to highlight the printer driver icon
you installed. On the right side of the
Chooser, select the printer to which you
want to print. Close the Chooser.
4
Step 3.
Turn the DCP power switch ON.
Step 4.
Insert the CD-ROM into the CD-ROM
drive. Then, follow the instructions
on the screen.
(Same step as for Windows
®
95/98/98SE/Me/2000 Users Step 3. ,
1
to
9
)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP1000 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP1000

Brother DCP1000 User Manual - English - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info