19828
3
Zoom out
Zoom in
Previous page
1/4
Next page
( For Windows
®
2000 Professional User )
For
Parallel interface cable users
1.
In the Connect Cable window,
click Next.
( For Windows
®
95/98/98SE/Me Users )
2.
When the above screen appears,
click Finish and
wait
as the PC
restarts Windows
®
and continues
the installation.
3.
Click Yes to have the Control
Center loaded each time
Windows
®
is started. The
Control Center will appear as an
icon in the task tray. If you click
No the Scan key on the DCP will
be disabled. *3
1.
In the Connect Cable window,
click Next.
2.
When the above screen appears,
Click Finish and
wait
as the PC
restarts Windows
®
and continues
the installation.
3.
When the Digital Signature Not
Found dialog boxes appear, click
Yes to install the driver.
4. Click Yes to have the Control
Center loaded each time Windows
®
is started. The Control Center will
appear as an icon in the task tray.
If you click No the Scan key on the
DCP will be disabled. *3
The Brother Printer and Scanner drivers have been
installed and the installation is now complete.
The Brother Printer and Scanner drivers have been
installed and the installation is now complete.
( For Windows
®
2000 Users )
For
USB interface cable users
1.
In the Add Printer Wizard
window, select BRUSB: USB
Printer Port, and then click
Next.
( For Windows
®
98/98SE/Me Users )
2.
Accept the default Printer
name by selecting Yes, and
then click Next.
4.
If the test page is printed
correctly, click Yes.
If you click No, follow the
prompts on the screen to
correct the problem.
1.
When the Digital Signature Not
Found dialog boxes appear, click
Yes to install the driver.
3.
Select Yes (recommended),
and then click Finish. A test
page will be printed so you can
check the print quality.
5.
Select Yes to restart your
computer, and then click
Finish.
The Brother Printer and Scanner drivers have been
installed and the installation is now complete.
2.
Select Finish to restart your
computer.
The Brother Printer and Scanner drivers have been
installed and the installation is now complete.
6.
Click Yes to have the Control
Center loaded each time
Windows
®
is started. The
Control Center will appear as
an icon in the task tray. If you
click No the Scan key on the
DCP will be disabled. *3
3.
Click Yes to have the Control
Center loaded each time
Windows
®
is started. The Control
Center will appear as an icon in
the task tray. If you click No the
Scan key on the DCP will be
disabled. *3
3
Step 4.
Connect the DCP to your PC with Parallel Cable.
A. Connect the Filter Core and Cable Tie to the parallel interface cable.
B. Connect the parallel interface cable to the parallel interface port of the DCP and secure the wire clips.
C. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of
your computers parallel printer port, see the Users Guide for your computer.
Step 5.
Turn the DCP power switch ON.
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
Step 4.
Turn the DCP power switch ON.
Step 5.
Connect the Filter Core and Cable Tie to the USB cable,
and then connect the DCP to your PC with the USB cable.
(It will take a few seconds for the installation screen to appear.)
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DCP1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DCP1000 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DCP1000

Brother DCP1000 User Manual - English - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info