660483
5
Zoom out
Zoom in
Previous page
1/11
Next page
5 REFERENCE AMPLIFIER A500 User Manual
1. Introduction
The A500 features special circuitry that protects your speakers from transients
during start-up and your amp from overheating. The amp is not put at any risk
even if there is a short on its outputs.
Various operating modes, such as parallel and mono mode, open up dierent
possibilities for eective implementation with the rest of your audio equipment,
leaving little to be desired.
Balanced inputs and outputs
Your BEHRINGER A500 features electronically servo-balanced inputs
(exception:RCA connectors (6) and (7) are intended only for unbalanced
connections). Theautomatic servo function recognizes when unbalanced
jacks are connected and internally adjusts the nominal signal level so that no
dierence in the signal level between inputs and outputs exists (6 dB correction).
This manual first describes the terminology used, so that you fully
understand the A500 and its functions. Please read the manual
carefully and keep it for future reference.
1.1 Before you get started
1.1.1 Shipment
Your A500 was carefully packed at the factory, and the packaging was designed
to protect the unit from rough handling. Nevertheless, we recommend that
you carefully examine the packaging and its contents for any signs of physical
damage that may have occurred during transit.
If the unit is damaged, please do NOT return it to BEHRINGER.
Instead, notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be honored.
Always use the original packaging to prevent damage during storage
or transport.
Make sure that no children are left unsupervised with the A500 or
its packaging.
Please ensure proper disposal of all packing materials.
1.1.2 Initial operation
Make sure there is enough space around the unit for cooling. To avoid
overheating, please do not place your amplier near radiators and other
equipment emitting heat.
Before plugging the unit into a power socket, please make sure you
have selected the correct voltage!
The fuse compartment near the power plug socket contains three triangular
markings. Two of these triangles are opposite one another. The voltage
indicated adjacent to these markings is the voltage to which your unit
has been set up, andcan be altered by rotating the fuse compartment by
180°. ATTENTION:Thisdoes not apply to export models that were
manufactured only for use with 120 V, for example!
If you alter the units voltage, you must change the fuse accordingly.
The correct value of the fuse needed can be found in the
chapter “SPECIFICATIONS.”
Faulty fuses must be replaced with fuses of appropriate rating
only! The correct value of the fuses needed can be found in the
chapter “SPECIFICATIONS.”
Power is delivered via the cable enclosed with the unit. All required safety
precautions have been adhered to.
Please keep in mind that all your equipment has to be grounded
at all times. For your own protection, never change or disable the
grounding on your equipment or on the cables! The unit should
always be connected to the mains socket outlet with a protective
earthing connection.
Attention!
High volume levels can damage your hearing and your speakers.
Please turn down both volume controls to the minimum (all the way
to the left) before you power up the amp. Always make sure you use
appropriate volume levels.
1.1.3 Online registration
Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warrantycarefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should
your BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer A500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer A500 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer A500

Behringer A500 Quick start guide - English - 11 pages

Behringer A500 User Manual - German - 11 pages

Behringer A500 Quick start guide - German - 11 pages

Behringer A500 User Manual - Dutch - 11 pages

Behringer A500 Quick start guide - French, Portuguese, Spanish - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info